Multi Point Hardware and Trim Handle Sets

Part Number 825 Hoppe Single Point Gear Box as shown in pictures and in product video **** 825 Single point gear box is not interchangeable with multi point gear box system interior components are different see video**** In stock: Only part # 825-D which has a 1 3/4" Backset and 1" Dead Bolt Throw Special Order: All other part numbers are special order items (no returns or order cancellations) and can have a 1-4 week lead time once you place your order.   Handing: Non handed - Strike is reversible for both left hand and right hand doors (see video below or revering latch instructions)  Install Instructions: Remove set screws on handle levers and remove Remove mounting screws on faceplate estuation of the handle set On side of door remove screw that lines up with the lock cylinder. Remove the handle set Remove all screws down the side of the door that holds on the gear box (keep all screws you will reuse them) Install new multipoint with screws Test for Operation  Reinstall handle set Test for proper operation

Read more less

Part Number 855 Single Point GU Gear Box Hardware*  Schlosskasten Security / Schlossk. Sec. *Single point gear box  is not interchangeable with multi point gear box system interior components are different. For Swinging Patio Doors Depending on vintage your sticker label color can be orange or white with the following numbers:  Orange Label:  6-29377-45-0-1 A  45-92-8 or 45-92-8 EINST. White Label:  6-29377-45-0-1 B  Scholssk.Sec.U 45/92/8 Handing: Strike is reversible for both left hand and right hand doors. See video on how to reverse the latch  Brands known to been used on: GU, Hurd, Sierra Pacific and More. Install Instructions: Remove set screws on handle levers and remove Remove mounting screws on faceplate estuation of the handle set On side of door remove screw that lines up with the lock cylinder. Remove the handle set Remove all screws down the side of the door that holds on the gear box (keep all screws you will reuse them) Install new multipoint with screws Test for Operation  Reinstall handle set Test for proper operation *Single point gear box  is not interchangeable with multi point gear box system interior components are different. updated 7/18/23

Read more less

Part Number 810   Flipper/Tongue Style Hoppe Multi point for Hurd Swinging Patio Doors and others (If your door is another door brand please email us and we can email you a worksheet you ok will need to fill out to get you the correct Hoppe multipoint for your door. info@windowpartscenter.com) Brass color no longer manufactured - only comes in stainless steel for both the gear box and the extensions.  Comes with: bottom extension with gear box attached and the top extension (choose your door height size). The Hoppe #810 Roller style is the direct replacement for old FUHR Roller Multi point that was on Hurd doors – no modification is needed when changing to the Hoppe #810. The only difference is some of the FUHR multi point had an automatic fire to engage the multi point, the Hoppe does not. So with the Hoppe to engage the multi point you close the door then lift up on the door handle then throw the dead bolt to lock. Hoppe Roller Style will also replace the Old FUHR Roller style. handing: Non handed latch is reversible. See video on how to change latch handing   Top Extension: Comes in Door Heights: Retro/6-8, 6-10, 7-2, 8-0. Style Options: Hoppe Gear Box Pin/Roller Style Hoppe Gear Box Flipper/Tongue Style Hurd Door Panel Heights for Top Extension:77" = Retro/6-878" = Retro/6-880" = 6-1084" = 7-293" = 8-0For Classic Hurd Doors Manufactured from 2005 and PriorFuhr Multi point used on Classic Hurd doors are no longer manufactured - Hoppe Multi point is the direct replacementNumber Known To Have Been On Older Gear Box (Hoppe Roller Style Brass Color): 1334291 - this is a component number.  Install Instructions (also see instructions in pictures): Remove set screws on handle levers and remove remove three mounting screws on faceplate estuation  On side of door remove screw that lines up with the lock cylinder. Remove the handle set Remove all screws down the side of the door that holds on the multipoint system (keep all screws you will reuse them) Install new multipoint with screws Test for Operation  Reinstall handle set Test for proper operation

Read more less

Part Number: S4112 W&F Multipoint Mortise Lock  2-3/8IN BACKSET For 6 Inch handle  Used On: MULTIPOINT MORTISE LOCK2-3/8IN BACKSET 6IN HANDLETO CYLINDER PEACHTREECITADEL IPD AND CITATION high performance stamped on side of mortise lock box. U.S. PATENT NO’S 5,290,077 5,388,875 Color: Older ones are a gold color where the current version is more green. Green is a direct replacement for the gold.  Non handed - See how to video below. the mortise is reversible for your door handing and also has a interior plastic release. To reverse the lock direction - remove the side plastic covers and swamping the internal cams - side to side. The lock bolt can also be reversed by extend the bolt and slide off the bolt base. This center mortise lock rotates 50 degrees to retract the bolt. The mortise lock works with all handle sets designed for this lock system [1993-2002]. Replacement handle bushing kit [SKU 56-115] and Auxiliary Lock module springs are recommended parts when replacing the center lock mortise. DO NOT TAKE APART THE MORTSE LOCK BOX OR REMOVE ANY SCREWS- THERE ARE NO REPLACEABLE PARTS INSIDE THIS LOCK BOX. ANY ALTERATION OR DISASSEMBLY OF THIS LOCK WILL VOID ANY RETURN POLICY. ALL MORTSE LOCKS ARE CHECKED FOR FUNCTION PRIOR TO SHIPMENT. Associated Parts Sold Separately: S4112TK - Alignment Key Tool - System Rod Timing Key D301 W&F Trilennium multipoint 6 Inch CTC Replacement Handle Set S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F S4115 Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock  

Read more less

#813 - Hoppe 3Pt Convert Auto Release Striker - Bright Brass   Replacement Parts for Hoppe Multipoint Hardware used on swinging patio doors May have minor scuffs, etc these come this way from the factory not considered a defect.  Known To have Been Used On: Hurd, Weather Sheild, Hoppe, Marvin BiltBest and many other door brands that used Hoppe Multi Point Hardware  Sold Separately Are Part Numbers:     #833 - Hoppe 3Pt Convertible Under plate #834 - Hoppe 3Pt Striker For Rollers - Auto

Read more less

Part Number: D301* W&F Trilennium 6 Inch CTC multipoint bore D301 is the new Replacement Handle Set - - Non stock item special order - Estimate 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns  D301 is for doors with: 6 inch center to center 1 7/8" or  2 1/8" diameter bores and screw hole placement 5 3/16" Center To Center.  Requires: 1 11/16" or 2 1/8" crossbore Screw Hole Placement: 5 3/16" Center To Center  Model: D301 Standard Set** Size: for Door Panel Thickness 1 3/4" or 2 1/4" Colors:  Victorian Bronze, Satin Nickel, Bright Brass Style:  Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates this is used with the newer style multi point see pictures for lever degree diagram). Active Modified 180 Degree*- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates that is used with older multi point and double bore systems see pictures for lever degree).  Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever****  For Inactive panels in French doors - that is fixed or has independent astragal installed  Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors that has 3020 lock installed only*** Handing: Universal  - Non handed works for both LH and RH swing doors Notes for other options for this style hardware on older doors:   D301 handle set is manufactured to be used with the current multipoint system and will work with it for you right out of the box - you will order Active Standard 150 Degree (see pictures for lever degree diagram and associated parts below). If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/16" Center To Center then you will order Active Modified 180 Degree to with with either of these two options (see pictures for lever degree diagram and associated parts below). If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852). If you are not sure what  type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com footnotes: Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns  *Active Modified 180 Degree bushing or cartridge has no manufacture warranty Warranty claims are handled on a case by case bases by the manufacture. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review. This handle set also comes in other Models: See part numbers: D300, D301, D302, D304 Operational Lever: Can move up and down when door is unlocked Fixed Lever: Inactive, and is intended for push/pull function. Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect. Associated Parts Sold Separately: S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F S4115 Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock For the Current Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands. Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate      

Read more less

Part Number: 840 Current Style Active  Amesbury Truth Sentry® .63 and Sentry® .03 Used For GU Multi Point Hardware ACTIVE HANDLE SET* (Hurd and Sierra pacific) Active handle sets come keyed with thumb turn and are for single door or the primary active door panel on a French door. 10 Inch Escutcheon NOTE TO CUSTOMER: As of March 20 2017 the OLD STYLE 8.9375 long Escutcheon was discontinued by the manufacture (mounting screw hole where 7 5/8" center to center. The new style has 10" long Escutcheon (Mounting screw holes are 8.5" center to center). Note this height change does alter the placement of our mounting holes. Bottom mounting screw hole will be reused, but the customer will have to drill one new top mounting screw hole. The old mounting screw hole will be covered by the escutcheon.  All handle sets will be shipped with the new 10 inch taller escutcheon plates. Please note a new mounting hole will be necessary. Field instructions (see pictures)  Special Order Item. No returns exchanges or order cancellations once order has been placed. Please allow 2-3 week lead time. Finish Options for Different Styles:  (All styles are not available in every finish color) Classic Escutcheon with Traditional Handle  Antique Brass Black (Matte) Bright Brass Brushed Chrome Champagne Oil Rubbed Bronze FB**  Polished Chrome Satin Nickel White Classic Escutcheon with Loft Handle  Antique Brass Brushed Chrome Oil Rubbed Bronze FB (forever bronze not true oil rubbed bronze that will change) Polished Chrome Satin Nickel White  Contemporary Escutcheon with Loft Handle Antique Brass Black (Matte) Bright Brass Brushed Chrome Oil Rubbed Bronze FB** Polished Chrome Satin Nickel White Squared Contemporary Escutcheon with Contemporary Handle  Antique Brass Black (Matte) Bright Brass Brushed Chrome Oil Rubbed Bronze FB** Polished Chrome Satin Nickel White Special Order Item. No returns exchanges or order cancellations once order has been placed. Please allow 2-3 week lead time.Used on Hurd Inswing and outswing patio doors all wood and wood clad 2006 - Present - Direct Replacement For 2005 models as well *For Semi Active handle set see part number 841 Has thumb turn no keyed lock- To be used on a secondary door panel on a French door  that has shoot bolts that are operated and locked into place by the handle set. *For dummy handle see part number 842 no operation no thumb turn - To be used on a secondary door panel on a French door that is fixed in place with no operation or has manual shoot bolts that are not operated by the handle set. **FB = forever bronze so it will not change color over time like a true oil rubbed bronze would.

Read more less

Part Number: 880 GU Latch and Dead Bolt Strike Plate Handed: Left Hand, Right Hand Colors:  Stainless Steel  Special order color: Oil Rubbed Bronze (special order items - no returns allow 2-3 weeks lead time) Discontinued Colors Once stock is gone no longer available: Antique Brass Bright Brass Polished Chrome White Screws Not Included: Factory Recommends using 7 x 5/8 PH FH Screw Known to be used on: GU, Hurd and Sierra pacific WI in-swinging wood/clad doors.

Read more less

#834 - Hoppe 3Pt Striker For Rollers - Auto - Bright Brass Replacement Parts for Hoppe Multipoint Hardware used on swinging patio doors Known To have Been Used On: Hurd, Weather Sheild, Hoppe, Marvin BiltBest and many other door brands that used Hoppe Multi Point Hardware  Sold Separately Are Part Numbers:  #813 - Hoppe 3Pt Convert Auto Release Striker #833 - Hoppe 3Pt Convertible Under plate    

Read more less

Part Number 810R  Hoppe Multipoint Automatic Roller Bottom Gear Box Extension HLS9000 CUSOTMER PLEASE READ BEFORE YOU ORDER: See chart for dimensions to compare with your multipoint BEFORE you place your order. If measurements do not match for your multipoint please email us for the worksheet you will need to fill out for a quote. Single point gearbox is not interchangeable with multipoint gearbox. The cover may look the same but internal components are different. Info@WindowPartsCenter.com Material: Stainless Steel (sliver). Brass color no longer manufactured - only comes in stainless steel for both the gear box and the extension. See features and benefits picture.  Style: Roller Comes with: bottom extension with gear box attached (top extension SOLD separately see part number 820R for top extension these are for Hurd doors only. For other brand doors please email for worksheet to fill out for a quote)  The Hoppe #810R/820R Roller style is the direct replacement for old FUHR Roller Multi point that was on Hurd – no modification is needed when changing to the Hoppe #810 - you need to order both top extension 820 and lower extension with great box 810 to use as a replacement with old FUHR. The only difference is some of the FUHR multi point had an automatic fire to engage the multi point, the Hoppe does not. So with the Hoppe to engage the multi point you close the door then lift up on the door handle then throw the dead bolt to lock. Handing: Non handed latch is reversible. See video on how to change latch handing  Associated Parts Sold Separately: 820R - Hoppe Multipoint Automatic Roller TOP Extension HLS9000 813 -  Hoppe 3Pt Convert Auto Release Striker  833 -  Hoppe 3Pt Convertible Under plate  834 - Hoppe 3Pt Striker For Rollers 819 - Hoppe Multipoint Latch Plate  S4019 - Hoppe LATCH AND DEADBOLT STRIKE WITH CURVED LIP S1400AC - Active with Cylinder Munchen Series M112PI/216N Handle Set S4300AC - Active with Cylinder Hoppe Munchen Series M112PI/3965N Handle Set S4200AC - Active with Cylinder Hoppe Munchen Series M112PI/374N Handle Set S4100AC - Active with Cylinder Hoppe Munchen Series M112PI/216N Other Hoppe Multipoint and Single Point We Stock: 810T - Hoppe Multipoint Automatic Tongue Lower Extension HLS9000 820T - Hoppe Multipoint Automatic Tongue TOP Extension HLS9000 825 - Hoppe Single point Gear Box For Hoppe Multipoint We Do Not Stock Please Email us for worksheet and quote  Install Instructions (also see instructions in pictures): Remove set screws on handle levers and remove remove three mounting screws on faceplate estuation  On side of door remove screw that lines up with the lock cylinder. Remove the handle set Remove all screws down the side of the door that holds on the multipoint system (keep all screws you will reuse them) Install new multipoint with screws Test for Operation  Reinstall handle set Test for proper operation 810R Known to have been used on: For Classic Hurd Doors Manufactured from 2005 and Prior. Fuhr Multi point used on Classic Hurd doors are no longer manufactured - Hoppe Multi point is the direct replacement. Number Known To Have Been On Older Gear Box (Hoppe Roller Style Brass Color): 1334291 - this is a component number. 

Read more less

Part Number: D302* W&F Trilennium 6 Inch CTC multipoint bore D302 is the new Replacement Handle Set - Non stock item special order - Allow 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns   D302 is for doors with: 6 inch center to center 1 7/8" or  2 1/8" diameter bores and screw hole placement 5 3/16" Center To Center.  Requires: 1 11/16" or 2 1/8" crossbore Model: D300 Standard Set** Screw Hole Placement: 5 3/16" Center To Center  Size: for Door Thickness 1 3/4" or 2 1/4" Colors: Victorian Bronze, Satin Nickel, Bright Brass, Black   Style:  Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for newer style multi point see pictures)  Active Modified 180 Degree* - Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for older multi point and double bore systems see pictures)  Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever****  For Inactive panels in French doors - that is fixed or has independent astragal installed  Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors that has 3020 lock installed only*** Handing: Universal  - Non handed works for both LH and RH swing doors Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands. Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate   Notes for other options for this style hardware on older doors: D302 is manufactured for the current multipoint system and will work for you right out of the box - order Active Standard 150 Degree (see pictures). If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/16" Center To Center then Active Modified 180 Degree (see pictures) If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852). If you are not sure what  type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: info@windowpartscenter.com footnotes: Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns  *Active Modified 180 Degree bushing or cartridge has no manufacture warranty Warranty claims are handled on a case by case bases by the manufacture. Pictures need to be emailed to info@windowpartscenter.com to submit a warranty claim for factory to review. This handle set also comes in other Models: See part numbers: D300, D301, D302, D304 ****Operational Lever: Can move up and down when door is unlocked Fixed Lever: Inactive, and is intended for push/pull function. Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect. Associated Parts Sold Separately:  S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation For Trilennium Multi Point - Email us for quote. Info@WindowPartsCenter.com  

Read more less

Special order items estimated lead time 2-6 weeks. No returns or order cancellations  Part Number: S4114 GU Ferco 45MM Capri Lever  Swinging Door Handles Trim Sets - Handle Above Cylinder Handle trim Set only Capri Lever Handle Above Cylinder Style (as pictured for 1 door panel)  - multi or single point mortise boxes  sold separately  45 MM Trim Plate Capri Lever Handle Above Cylinder  Solid Brass or Zamac Trim Sets Stainless steel set screw on levers to secure spindle US cylinder with standard Schlege "c" keyway (active only) 90 degree locking with thrumb turn (for active and semi active) Unassembled kit for 1 3/4" and 2 1/4" thick doors Self- Centering Spindle Use with Mortise lock, SECURY S2, SH2 and SECURY Automatic Door Gears  Patented handle clipping system.  Screw Hole Spacing: 7-3/4 inch Zamac Available in: Dark Bronze, Black and White Solid Brass Available In: Satin Chrome, Polished Brass, Antique Brass, Oil Rubbed Bronze, Satin Nickel, Dark Bronze, Pewter and Black Style: Active, Semi Active and Dummy Scroll thru pictures  for dimentions and manufacture installation and trouble shooting instructions.

Read more less