SuperSeal Vinyl Windows & Doors

Part Number 522 Sash Controls C Elite Keyed Handle Set with Offset Latch - Sash Controls  Face plate is 8 1/2" long x 1" wide (new style) Handle 5 1/2" Center to Center (CTC). Screw Holes are 3 15/16" Center to Center (CTC). (For Center Latch Style Handle Set see part # S3006) 2265 can be stamped on back of plate. Mortise lock box sold separately. Tailpiece can be cut to fit multiple thickness doors. (We cannot accept returns if the tailpiece has been cut).  Style (Function): Non-keyed, Keyed and Dummy Non-Keyed handle sets: Means you can lock and unlock your door only from the inside with the lock latch. But you can NOT lock or unlock from the outside. Most Colors are a stock item. Keyed handle sets: Keyed Means you can Lock and Unlock your door from the inside using the lock latch AND Lock and Unlock your door from the outside using a key. Most Colors are a stock item. Shafts for the keyed lock may need to be cut depending on your thickness of door your have. Otherwise handle will be loose on your door. If you want to avoid the possibility of having to cut the shafts order the NON KEYED version. (see trouble shooting install at bottom of page for more details on cutting shafts). Also see instructions that come with the handle set that is also pictured above Dummy Handle Sets: No Locking or unlocking capability. Used mostly on 4 wide doors where 2 panels operate. Dummys are mounted on the secondary door. Allow 3-4 week lead time once order is placed. Dummy Handle sets DO NOT need a new Mortise lock! Most colors are stocked. If a product is not in stock allow a 2-5 week lead time once order is placed. We will notify you on lead time if a product is not in stock.  If your Recessed Mortise Lock has the 90 degree black cylinder  you will need to purchase a new recessed mortise lock part # 518, S3007 or #S3011 with the 45 degree gray/silver cylinder for this handle set to work. Both mortise box work with handle # 522 so you will need to choose the type that your door panel is machine prepped for. Associated Products Sold Separately:  Part Number: 518 Mortise Lock  Part Number: S3011 Mortise Lock Box Part Number: S3007 Mortise Lock Box Part number S3006 For Center Latch Version  Handle Set Trouble Shooting Install:If when using they keyed handle set and the turn lever for the lock and the turn lever for the keyed cylinder are hitting and pushing each other out of the the latch: This could be because you have the french style Hurd door and the panel is a different thickness. What you will need to do is cut the shafts so they both can fit into the mortise lock and the handle set can be screwed down tightly. Easiest is to put on the outside handle in place and mark the shaft where it comes through. Take it off and do the same for the inside handle. Then, you can cut just shy of that mark on both shafts and then they should meet in the middle. Double check your marks so you cut on the correct side and don't cut too short. This handle set is made as a replacement option for many door thicknesses, which is why you get multiple length screws and can cut the shafts to fit. If you want to avoid doing this all together order the non keyed version. Also, see instructions that come with the handle set that are also pictured above. Never use power tools when installing handle sets you run the risk of stripping out the screws.  If you are using the 522 to replace the Old Hurd Wood and Brass Handle Set 516 for how to videos and full instructions please click here for how to page.

Read more less

Part Number 984 Amesbury Truth Window Lock Back Support Plate Color: E-gard Beige  Comes in Packs of 1 or 5 Associated Parts Sold Separately:  989 Vinyl Window Sash Lock - Casement and Awning Windows Used On: Amsbury Truth, Hurd Monument Vinyl, Cascade Vinyl, SuperSeal  and many other vinyl window brands

Read more less

 Part Number C10000ADAC Interlock ASSA ABLOY TRU-Latch Pro Latch Cover ADA with pull string The original standard in automatic sash lock solutions for hung and sliding windows. The classic aesthetic design of our Concealed Screws Cover, with an adjustable pull cord to disengage the lock. Designed for easy operation and ADA compliancy. Sold Individually ADA Cover Only (for large orders of QTY 100 and QTY 300 this will be considered special order item no returns) Color: White, Black, Almond (aka Beige) Material: Composite  Interlock Part Series: 5f798 Parts Sold Separately:  Mechanism: Part Number C10000M Mechanism Screws: Part Number C10000MS  Cover: Concealed Screw Cover Part Number C10000CSC Cover: ADA with pull string Part Number C10000ADAC Cover: With Exposed Screw Cover Part Number C10000ESC Cover: Slimline Composite or Zinc Cover Part Number C10000SLC Cover: With Exposed Screw Cover Part Number C10000ESC Keeper: Face Mounted Striker Keeper Part Number C10000FMK Keeper: Surface Striker Keeper Part Number C10000SSK Keeper Screws: Part Number C10000KS (Interlock US PAT NO 7,407,119 stamped on Mechanism ) 

Read more less

 Part Number C10000FMK   Surface Fixed Striker Keeper  (Face Mount Keeper) for Single Hung, Double hung and Horizontal Slider Window lock.. Sold Individually (for large orders of QTY 100 and QTY 300 this will be considered special order item no returns) Color: White, Clay, Almond (aka Beige) Parts Sold Separately:  installation jig: S1111JMechanism: Part Number C10000M Mechanism Screws: Part Number C10000MS  Cover: Concealed Screw Cover Part Number C10000CSC Cover: ADA with pull string Part Number C10000ADAC Cover: With Exposed Screw Cover Part Number C10000ESC Cover: Slimline Composite or Zinc Cover Part Number C10000SLC Cover: With Exposed Screw Cover Part Number C10000ESC Keeper: Face Mounted Striker Keeper Part Number C10000FMK Keeper: Surface Striker Keeper Part Number C10000SSK Keeper Screws: Part Number C10000KS Mechanism: Part Number S1111M Flip lock Keeper: Part Number S1111FLC  

Read more less

 Part Number C10000M  Interlock ASSA ABLOY Tru Latch Pro Latch Mechanism Only. Replacement Part The original standard in automatic sash lock solutions for hung and sliding windows. PRO-Latch features a removable cover and the ability to provide cost-effective proprietary aesthetics as well as architectural finishes. Whether you’re looking for a composite or metal cover, or a mechanism that is surface mounted or recessed into the profile, Interlock’s PRO-Latch is the highly customizable sash lock system that delivers superior performance. Dimension: 2 7/8 Inch Sold Individually (for large orders of QTY 100 and QTY 300 this will be considered special order item no returns) Interlock US PAT NO 7,407,119 stamped on Mechanism   Manufacture Features Removable snap-on cover (composite or metal options) Fits most sliding and hung window applications Multiple fixing locations available Hurricane rated in impact-certified applications Robust dual hooks for superior FER resistance Surface mounted or recessed into profile Patented cover design Manufacture Specifications ± 2.032 mm (0.080”) of misalignment tolerance in all directions ± 2.032 mm (0.080”) – ±4.064 mm (0.160”) of lateral adjustment depending on keeper design Passes all required FER testing requirements for sliding and hung windows Designed for Dade County impact window applications Has exceeded 145 kg (320 lbs) per lock in a pull test Endurance tested to 36,000 operating cycles Minimum 1,000 hours Neutral Salt Spray resistance Parts Sold Separately:  Mechanism: Part Number C10000M Mechanism Screws: Part Number C10000MS  Cover: Concealed Screw Cover Part Number C10000CSC Cover: ADA with pull string Part Number C10000ADAC Cover: With Exposed Screw Cover Part Number C10000ESC Cover: Slimline Composite or Zinc Cover Part Number C10000SLC Cover: With Exposed Screw Cover Part Number C10000ESC Keeper: Face Mounted Striker Keeper Part Number C10000FMK Keeper: Surface Striker Keeper Part Number C10000SSK Keeper Screes: Part Number C10000KS Replaces old Part number: C1000NS

Read more less

 Part Number C10000SSK Surface Striker Keeper for single hung, double hung and horizontal slider window locks Sold Individually (for large orders of QTY 100 and QTY 300 this will be considered special order item no returns) Color: White, Black, Almond (AKA Beige), Almond MK, Blue White Known Accessory Parts Sold Separately:  installation jig: S1111J Mechanism: Part Number C10000M Mechanism Screws: Part Number C10000MS  Cover: Concealed Screw Cover Part Number C10000CSC Cover: ADA with pull string Part Number C10000ADAC Cover: With Exposed Screw Cover Part Number C10000ESC Cover: Slimline Composite or Zinc Cover Part Number C10000SLC Cover: With Exposed Screw Cover Part Number C10000ESC Keeper: Face Mounted Striker Keeper Part Number C10000FMK Keeper: Surface Striker Keeper Part Number C10000SSK Keeper Screws: Part Number C10000KS Mechanism: Part Number S1111M Flip Lock Cover: S1111FLC  

Read more less

Part Number: C1033 Surface Mount Mortise Lock 45 Degree latch with face plate Deadlatch Assembly   Material: Standard Cylinder: 45 Degree Faceplate mounting screw holes: 4 5/8 inch center to center Overall Depth: 1-9/32 inch  Have known to been used on: Cascade, Sierra Pacific, SuperSeal, Jeld Wen vinyl sliding sliding patio doors, Amsbury Truth Hardware, 2998 Series, SuperSeal, Sierra Pacific Vinyl and Hurd Vinyl and more. VINYL 8000/8500 SERIES SLIDING PATIO DOOR (V-SPD) and more

Read more less

Part Number: S1015 Residential SafeGard 2R - Current Style Amesbury Truth Residential SafeGard™ 2R  Operating Control Device (WOCD) For Casement Windows The easy to operate SafeGard 2 is designed to limit the window opening to less than 4”. Designed to allow for factory installation as well as field application by trained personnel. Fits in the standard hinge cavity of 0.719"W x 0.438"H (nominal). Arm assembly has a decal with simple operating instructions, and track is assembled with visible colored plastic to discern the separate operations. .  This patented releasable limit device for windows meets the ASTM F2090 (window fall prevention) safety requirements for self-resetting, egress capable, fall prevention devices. Handing: Left Hand (Stamped with letter "A") or Right Hand (Stamped with letter "B") ****Determine handing by the hinge side of your window from the exterior. When looking at your window from the OUTSIDE of your home if it is hinged on the LEFT then you need a LEFT Hand WOCD)**** Style:  We recommend to check with your window manufacture which style to purchase for your window. R2 Standard -Track (with black clip and red button):  8 11/16 Inch Long x 3/4 Inch Wide x 1/4 Inch Deep R2 Narrow - Track (with black clip and red button): 7 1/16 Inch Long x 3/4" Wide x 1/4" Deep (For comparison the old Gen 1 Safegard Style with Red clip that is no longer available size was:  6 3/8" Long x 3/4" Wide X 1/4" Deep C2 For pricing and to order C2 Commercial WODC for 5/8” cavity please email us with how many Left and and Right hand you would want for quote.  Safeguard 2R Installation Instructions PDF  Ordering Instructions for SafeGard 2R: Residential Applications  1. Determine window handing by viewing from the outside looking in. If the casement window hinge is on the right side, you need a right hand limiting device. 2. The self-locating sash device is designed for a 7/16 in. [11 mm] cavity. Ensure there are no lips or ribs that would block the ability of the sash device to engage with the frame device. Consult the window manufacturer or application if cavity is larger than 7/16 in. [11 mm] or if lips /ribs are present, or if the cavity height on the jamb is significantly different than the sill. Shims may be required. 2.1. Locate the hinge cavity by finding where the hinge arm attaches to bottom of sash. Follow this cavity around the corner of the sash to the vertical sash member 2.1.1. If there is no cavity on the vertical sash member, please consult with your window manufacturer for application review. Includes: Arm Assembly, Track  Assembly, Template, Window Label, Screw Pack (4 screws) and Operating and Installation Instructions. (Recommended screws are #8 Pan Head, Length and screw type depended on application). Product Highlights Product will limit the window opening to less than 4” and requires two actions to release the device allowing the window to open fully for egress purposes WOCD and egress release will not reduce the open area of the window unit beyond applicable code requirements Avoids interference with operation or performance of a window Features and Benefits beyond ASTM F2090-21 Fully concealed unit after installation and window in closed position Easy and accurate installation in the factory or field for residential applications (SafeGard™2R) and factory or field commercial applications (SafeGard™2C) Built-in forgiveness with field adjustment feature and allowing for up to 1/8” sash sag All adjustments can be done inside the home after window is installed Pan head screw (SS) use for ease of handling Concealed arm after released from track Window Opening Control Devices as required by ASTM F2090-21, the standard specification for window control devices with emergency (egress) release mechanisms Actions to release the device for egress purposes are to be performed without the use of keys, tools or special knowledge WOCD will automatically re-latch when window is fully closed Recommended Mounting Screws. #8 Pan Head, length and screw type dependent on application Safegard 2R Residential Application Info:   As a market leader in fenestration hardware, AT engineered, patented, and manufactured a releasable limit device for windows which meets the ASTM F2090 safety requirements for self-resetting, egress capable, fall prevention devices. The ASTM F2090 addresses window fall prevention that helps protect against potential falls by children through open windows. This is done by allowing the window opening to be set at a predetermined position of fewer than four inches (4”) and automatically re-latch when fully closed. AmesburyTruth’s SafeGard™ 2R provides a means that the window, when opened in an initial operation, will limit the venting to less than 4”. By code, two actions are required to open the window fully for egress purposes. This additional operation can be performed without the use of keys, tools, or special knowledge. SafeGard™ Window Opening Control Device is designed to allow for factory installation as well as field application by trained personnel.  PRODUCT TIPS 1. We recommend that a casement WOCD be used in casement application where applicable and building codes require such application. Please check the local building codes for applicability and egress size requirements. 2. Casement WOCD can be factory installed or field retrofit on all profile material types where standard/nominal (0.719” W X 0.438”H) hinge cavity is available. Please observe all safety instructions and consult window manufacturer when you have questions or concerns. Please contact sales for application to ensure form, fit, and function for your specific window application 3. Standard 2 walls (vinyl, fiberglass, aluminum, and other composite materials) on the profile are required for proper screw retention 4. Correct handing with proper installation is important to ensure proper operation of the device  ARCHITECT SPECS Window Opening Control Devices as required by ASTM F2090-21, the standard specification for window control devices with emergency (egress) release mechanisms. Product will limit the window opening to less than 4” and requires two actions to release the device allowing the window to open fully for egress purposes. Actions to release the device for egress purposes are to be performed without the use of keys, tools, or special knowledge. WOCD will automatically re-latch when window is fully closed. This WOCD shall be “SafeGardTM Casement   The easy to operate SafeGard 2R is designed to limit the casement window opening to less than 4”. This patented releasable limit device for windows meets the ASTM F2090-21 (window fall prevention) safety requirements for self-resetting, egress capable, fall prevention devices. Arm assembly has a decal with simple operating instructions, and track is assembled with visible colored plastic to discern the separate operations. Designed to allow for factory installation as well as field application by trained personnel. Fits in the standard hinge cavity of 0.719"W x 0.438"H (nominal).   Meets ASTM F2090-21, with additional benefits Prohibits the free passage of a 4” diameter rigid sphere Requires two separate actions to release the mechanism WOCD and egress release will not reduce the open area of the window unit beyond code requirements Avoids interference with operation or performance of window Fully concealed when window is closed Easy, accurate factory install. Field adjustment features allows for up to 1/8” sash sag adjustment from inside the home Suitable for wood, composite and vinyl windows Window Type Casement Window Material: Wood Composite  Vinyl Recommended Mounting Screws #8 Pan Head, length and screw type dependent on application Current Safegard 2 Video Below Old Style No Longer With Red Clip Video Below- this style is no longer available replacement  is the S1015

Read more less

Part Number: S1062 Roto North America  X Drive Awning Window Operator Roto-Frank - For Vinyl Window Applications   Style Option: Comes in X Drive and Pro Drive Option. See picture AS IS: New but minor finish scratches- no returns on as is items all sales are final. Discounted due to scratches on finish. See picture: collection showing examples in of finish damage. Items sold individually. X Drive: Euro White and Beige In Stock Pro Drive (*Pro drive is being phased out, once discontinued, the X Drive is the direct replacement. If you are replacing a pro drive with an x drive you will need to also order a new handle see part number S10012)  Special order items: X Drive Bright White Pro Drive: Dark Brown, Earth Brown, Bright White, Beige (aka almond) allow: 2-4 week lead time as not all colors are in stock at the factory. No returns or order cancellations on special order items  Associated Parts Sold Separately:  SS10013 - Roto North America Face Mount Bracket Assembly For Vinyl Awning   Associated X Drive Parts Sold Separately :  Part Number SS10012 - Roto X Drive Handle for Casement and Awning Window Operator Associated Pro Drive Parts Sold Separately :  Part Number S1066 - FOLDING HANDLE FOR ROTO PRO DRIVE OPERATORS 5/16IN HEX END  Known Part Number: OP06-1507, OP05-2018, OP05-2017, OP06-7542-08, 203812, OP05-2044, OP05-2046, OP05-2047, OP05-2045, OP06-7546-26 PL1, OP05-7540-00

Read more less

Part Number: S1066  Roto Frank North America  FOLDING HANDLE FOR ROTO PRO DRIVE OPERATORS 5/16IN HEX END OP05 In Stock Colors: Blue White, White, Almond (aka Beige) Special Order Color: Earth Brown (email or text QTY you would like for lead time) Known Part Number: OP05-7800-00, OP05-7810-00, OP05-7811-00, Wi21195-  Associated Parts Sold Separately: Part Number S1062 Pro Drive Awning Window Operator Pro Drive 13-1/2 inch Single Straight Arm Operator  For X Drive Version of handle see part number SS10012

Read more less