Part Number: 106 Casement Sash Lift Block- Transparent
Transparent Sash Lift Block with adhesive backing. This mounts on the lower part of window frame opposite the hinge. About 2" from corner of frame (see picture - click on picture to enlarge).
Size: 2 1/2" Long x 1 1/8" Wide
Part Number 107
Beige Sash Lift with adhesive backing. Located on the under side of sash - approximately 3 1/8" of edge of wood on the sash (See picture - click on picture to enlarge)Used on Hurd Casement Windows
Part Number: S1122
Sold in: Packs of 4 or 10
Replacement Window Lock and Keeper Screws Philips 1 1/4 Inch x #8
In Stock Colors: E-guard (used on keepers), New Goldtone, Goldtone, White, Bronze
Specials Order Colors: Chestnut Bronze, Beige, Coppertone, Clay (allow 1-2 weeks for your order to ship)
Part Number 964 - Nailing Fin Corner Pad
window installation supplies
For additional protection to prevent water from going in behind nail fin (use corner pads with normal flashing and install practices)
Sold In: Set Of 4 as shown in picture
Color: Black
Stick On
963 - Offset Nailing Fin For Sliding Patio Door
Color: WhiteSold in: 4 pack of 6 foot pieces. For runs longer than 6' the nail fin can be pieced together in the frame.
Known to be used on sides and head of Hurd and Sierra Pacific Sliding Patio Doors.
P/N 692 used along bottom sill.
Part Number: 694
Bay & Bow Window Cable Support System Kit
Kit comes with:
A. 2-Support Cables (9'3-1/4")
B. 2-Cable Cleats
C. 4-2-1/2" Wood Screws
D. 2-"T" Nuts (Bushings)
E. 2-Washers
F. 4-1/4" x 28 Hex Nuts
Product can be used on Sierra Pacific, Hurd and other brand bay and bow units. Instructions shown on our website are from Sierra Pacific (who purchased Hurd that uses this cable support system on their bay and bow units)
Part Number: S1098
Peachtree Ariel Casement Window Sash Hinge Pivot Screw and Washer
Fits Upper and lower sash hinge link arm (sold separately)
What's Included: Each kit comes with 2 screws and 2 washer
Screw is Stainless Steel
Washer Is Aluminum
Associated parts Sold separately :
Part Number: S1096: Bottom Casement Hinge Assembly
Part Number: S1097: Top Casement Hinge Assembly
Part Number S4107
S4107 Hoppe Set Screw For Cylinder with Crescent Knob
Special order item no returns. Please expect a lead time of 1-4 weeks.
Related Parts Sold Separately:
Part Number S4102 - Hoppe Full Cylinder
Part Number S4103 - Hoppe Short Cylinder Insert
Part Number S4104 - Ring Wrench Removal Tool
Part Number S4105 - 2 MM Wrench
Part Number S4106 - Plastic Insert
Part Number: MS100
Aluminum Cabinet Door Handle or drawer pulls
comes in sets of 2
Material: Aluminum
Dimension:
overall 8.25 inch (8 1/4 inch)
screw hole center to center: 8 inch
Diameter: .25 (1/4 inch)
screws not included recommended: 10/32
In Stock
For bulk pricing of QTY 10 sets or more please email for quote.