Roto North America

Part Number: CA200 Roto Face Mount Operator  Old style 3 1/4" Arm Center of Operator to center of arm hole  roto operators is a discontinued product. CA200 is a retro fit replacement option. See details below New Retro Fit Operator: 3 Inch Arm from Center of Operator to center of arm hole ) see picture.  Overall Housing Width: 5 1/2" Rear Mounted Screw holes will be 5 inches center to center  CA200 is a replacement option which would need slight modification to install. As this is a retro fit application please read all instructions below and view pictures as well as old style dimensions vs. the CA200. If this this retro fit application will not work for your the only other option will be to replace the window. If you feel that you can not perform this retro fit install you will need to hire an installer.  R&R is not responsible for any damage to window during retro fit install or any labor costs. CA200 Kit Comes with: 1 Operator you chose of LH or RH 2 Rear Mount Screws - 1/2" long* 1 Handle *As this is a retro fit application used on many brands of windows some customers have found they needed longer screws which you can purchase at your local hardware store. Screw pitch that we found fit in the arm hole in new operator is a #10 x 32. Some customers old screw from their existing operator is a #10 x 24 when we try that size it only goes in about 1 to 2 turns. We recommends ACE hardware for replacement screw if needed they have more screw options. And they usually have a thread gauge in their screw section so you can take the operator with you and see which style would work best. For your retro fit application.  Color: White Only Retro Fit Required Tools You Will Need: Drill 5/16" (8mm) Drill Bit Tape Measure Screwdriver Retro Fit Instructions: Remove old operator, by removing operator housing screws and screw that connects the operator arm to the corner link arm.  Remove mounting plate. Keep the screw that connects the corner link arm To the operator arm. Drill a 5/8” hole on the hinge side exactly 5 inches from the opposite side of the operator mounting hole. ( the oblong hole the operator goes thru) Screw holes will need to be exactly 5” center to center apart Install the new operator with the screws supplied One will go into the end of the existing mounting hole and the other will go into the new hole you drill Attach the corner link arm to the operator arm with the screw you saved. your window should now operate  Clean and lubricate your hinges with spry silicone for better results (do not used WD40) New Retro Fit Operator: Overall Housing Width: 5 1/2" Rear Mounted Screw holes will be 5 inches center to center  3 Inch Arm from Center of Operator to center of arm hole.  Old Discounted Roto Handle Specifications: Overall housing width: 5 5/16" 4 inch center to center screw hole 3 1/4 inch arm from center of operator to center of arm hole.  Known part numbers: 57020; 36-333SP; G2-OSCP-02; G2-OSCP-02; G2-OSCP-O2; G2-0SCP-02; G2-STRKR-*11

Read more less

Part Number S1063 Roto North America Sill Mounded Casement Window Operator 10 Inch Arm - taken from center of housing mechanism to center of pin at the end of the arm Roto, Interlock, Made In New Zealand Handing is as shown in picture. See Left Hand and Right Hand Color: Blue White or White Discontinued Item. Once our stock is gone these will be no longer available. If you are able to add to cart it is in stock. Website will only allow you to add to cart the amount we have in stock for this product.  --------------------------------------------------------------------------------------------------------- For Awning Version of this operator that is  Left Hand Only - See part number S1061

Read more less

Part Number: C2006 4-1/8 Inch Black Top Spacer - Interlock Roto Dimensions: 4 1/8 Inch X 3.5 MM Thick X 22.5 MM High Shim Only Known Brands: Interlock, Roto, Cascade Use in conjunction with C2005 Friction Hinge Set Follow Related Parts Are Sold Sold Separately: Part Number C2002 -  Roto America Interlock Casement Split Arm Operator Part Number C2003 - Roto Interlock Non Folding Handle 5/16 Inch Hex Casement Awning Part Number C2004 - Roto America 5/16 Inch Hex Casement and Awning Folding Crank Handle Part Number C2005 - SX Interlock Friction Hinge Set Cascade Casement Awning Windows Part Number C2006 - 4-1/8 Inch Black Top Spacer - Interlock Roto Part Number C2009  - Interlock Connect Arm w/ modified Clip 160MM 6 7/8" Long Arm Part Number C2011 - Clamp Washer Part Number C2012 Brootom Back Plastic Shim Part Number C2013 DIE CAST BRACKET WITH ARM STAINLESS STEEL CONNECT ARM NOTCHED OUT  -Roto operator bracket 5 3/8"  

Read more less

Part Number S1090 Roto 10" HP200 Track and Arm Casement Hinge Assembly This is a discontinued hinge and the factory has to modify new style hinge to make work for the old style. You will receive the modified replacement style. See drawings  Stack Hight Options: 7/16"  stack height 9/16" stack height Please see pictures measurement "A" to determine what stack height you would need. 1/2" Stack Hight Discontinued No Longer Available  What's Included:  1 Left Hinge Track and Hinge Arm 1 Right Hinge Track and Hinge Arm (Left and Right can be called Top and Bottom as they are used on both Left handed and Right Handed Casements) 2 Shims Special Order Item. Not a stock item- no returns Known part number: HP200

Read more less

Part Number SS10004 Roto North America HG05 13" Adjustable Hinge Kit For Casement Windows Direct replacement hinge for the HG04 Hinge Style HG05 Adjustable Wrench Sold Separately See Part # SS10002 What comes in a kit: 1 top and 1 bottom hinge track and 1 Top and 1 Bottom Hinge Arm  Options for 13" Stainless Steel Adjustable Hinge Track: 13" Power Coated Washability Hinge Arm Measurements (taken at the longest and widest points See diagram): 13" Hinge Track: 12-11/16" L x 11/16" W x 5/16" D 13" Washability Hinge Arms: Arm With Black Track Guide 6-1/4" long, Arm that attaches to Track Hinge Adjustment Nut 7-1/4" Long 7/16" Stack height. ( for  1/2" Stack Height also order SS10020 shim)  Known Part Numbers: HG05-7202, HG05-7203, HG05-7506

Read more less

Part Number: SS10002 Roto North America Stainless Steel Hinge Wrench for HG05 Hinges  Fits on HG05 Hinge and Lock Bar Pin Product Note: Do not adjust past 1/4 turn past neutral either direction  This Hinge Works with the Following Hinge Kits" SS10003 - Roto North America HG05 10" Adjustable Hinge Kit For Casement Windows SS10004 - Roto North America HG05 13" Adjustable Hinge Kit For Casement Windows Known Part Numbers: SS10002, HG05-2010

Read more less

Part Number: SS10010 AS IS  Sold Individually Discounted Window Operators Scratch and Chipped  AS IS: NEW PARTS BUT HAVE AESTHETIC SCRACHES AND CHIPS ON THE FINISH  - THESE ARE NON RETURNABLE ITEMS AS THEY ARE AS IS. The extent of finish Damage varies from operator to operator  - picture's are examples. Website will only allow you to order the QTY that is stock. Price is firm. To order SS10010 that DO NOT have any scratches please click here Roto X Drive and Pro Drive Split Arm Dyad Casement Operator With Notched Base with Underside Arm Post (see pictures) Material: X Drive Standard, Style: Left Hand Or Right Hand (See pictures) Color X Drive: Euro White X Drive Known to have been used on SuperSeal, Hurd and Sierra Pacific Vinyl Windows X Drive: Known Part Number Stamped on Underside of Operator OP06-1508, OP06-7512- Pro Drive: OP05 X Drive: OP06 X Drive Associated Parts Sold Separately:  S10012 - Roto X Drive Handle for Casement and Awning Window Operator SS10018 Roto Casement Sash Operator Bracket  Pro Drive Associated parts Sold Separately:  S1066 - FOLDING HANDLE FOR ROTO PRO DRIVE OPERATORS 5/16IN HEX END

Read more less

987 - Roto Vinyl Casement Window Lock Dimensions: 4 1/2" x 3/4" Center to Center Measure: 3 7/8" Color: White only Known Part Number: 2791, 34-182-33W, 39-940

Read more less

Part Number: S1124 Roto North America  13-1/2 Inch Single Straight Arm Operator For Vinyl Casement Windows Application Style: X Drive OP06 or Pro Drive OP05 (*Pro drive is being phased out once discontinued  the X Drive is the direct replacement. If you are replacing a pro drive with an x drive you will need to also order a new handle see part number  SS10012)  Color: Bright White or Almond Bright White LH Hand is the only item we have in stock All Other Items Not stocked long lead time from factory  X Drive Bright white stamped on back: OP06-1606 for Right hand and OP06-1505 for Left hand  Associated X Drive Parts Sold Separately :  Part Number: S1123 Notched for Wood Window Application Roto X Drive and Pro Drive 13-1/2 inch Single Straight Arm Part Number SS10012 - Roto X Drive Handle for Casement and Awning Window Operator Associated Pro Drive Parts Sold Separately :  Part Number S1066 - FOLDING HANDLE FOR ROTO PRO DRIVE OPERATORS 5/16IN HEX END

Read more less

Part Number: S1127 Roto North America Surface Mount Awning Bracket For Awning Window (aka Roto-Frank Awning Bracket) Black part stamped: OP05 1007 Roto Known to have been used on Allsco and many other window brands. Associated Parts Sold Separately:  SS10013 - Roto North America Face Mount  Bracket Assembly For Vinyl Awning S1062 Roto X Drive and Pro Drive Awning Window Operator SS10012 - Roto X Drive Handle for Casement and Awning Window Operator Known Part Number: OP05-8021-00, OP05-8021 , OP05-1007, OP05 1007

Read more less