Marvin

Part Number: 102 Amesbury Truth Maxim Casement DLX Split Arm / Dyad Operator 102 maxim series has been discontinued. Once stock is depleted the direct replacement will be 147 Encore Series. When you order 147 Encore  - You will need to purchase the cover and handle kit part number 137 sold separately. The Maxim Series Dyad Operator is designed for narrow windows, but will operate a frame width from 16” to 32”; height up to 72” and a sash weight of up to 55 lbs. Replacement Parts for: Hurd, Marvin, Cascade, Bilt Best, Milgard, Sierra Pacific, Allsco and more. Known Part Number: 102, 45352, Truth, 50-50-32-011, 50-50-24-011, 50-50-32-012, 50-50-24-012 To Order Direct Replacement Encore Style 147:  Part Number 147 Encore Dyad Operator Part Number: 137 Encore Folding Handle and Cover Kit Instructions on How To Replace Operator Click On Blog Link Associated Parts Sold Separately for Part Number 102 Maxim DLX Style  P# 131 (Folding Handle)  P# 177 (Non Folding Handle).   If you are not sure you can e-mail us a picture of your existing operator. Please read our Parts Identification Instruction page and then e-mail your pictures to: info@windowpartscenter.com

Read more less

Part Number: 1000 Hoppe Arrone French Casement Hardware Connector Shaft 29.5MM - Lock Latch Shaft Length:  29.5 MM shown in pictures and in stock. 20.5MM 24 MM 20.5mm and 24 mm are NOT STOCKED can have a lead time of 2-3 weeks MM conversion to Inches:  20.5mm which is approximately 13/16 inches long 24mm – approximately 15/16” long 29.5 MM shaft version – shaft is approximately 1 5/32” long  This connector shaft has been known to have been used on Hurd, Sierra Pacific, Marvin and more French Casement Windows. Replacement option for old FUHR hardware that was bought out by Hoppe Bulk Pricing Shown In My Cart: QTY 2-5 10% off QTY 6+ 20% off Part Number: 1000, 3849093 Known To have Been used on Hurd, Sierra Pacific, Marvin, Pozzi and More. Related Parts Sold Separately:  Part Number 1000 - French Casement Connector Shaft FC Adaptor Part Number 1001 - French Casement Handle 33MM (1.5") Shaft  Part Number 1002 - French Casement Mounting Plate Part Number 1003 - French Corner Drive VS S-ES A0055 Part Number 1004 - French Casement Eurogroove Cover, Long Part Number 1005 -  French Casement Eurogroove Cover, Short Part Number 1006 - French Casement Gear S-ES 115/16 2MV FH Part Number 1007 - French Casement FC Linkage Part Number 1008 - French Casement Strike Lead-In S-ES Part Number 1009 - French Casement Strike

Read more less

#813 - Hoppe 3Pt Convert Auto Release Striker - Bright Brass   Replacement Parts for Hoppe Multipoint Hardware used on swinging patio doors May have minor scuffs, etc these come this way from the factory not considered a defect.  Known To have Been Used On: Hurd, Weather Sheild, Hoppe, Marvin BiltBest and many other door brands that used Hoppe Multi Point Hardware  Sold Separately Are Part Numbers:     #833 - Hoppe 3Pt Convertible Under plate #834 - Hoppe 3Pt Striker For Rollers - Auto

Read more less

1" Snap-In-Vinyl Glazing Bead - for 1" overall glass thickness USED FOR For 1" OA GlassThis item is sold in 6 foot (6') lengths only Color: White only (the color you see once you install) - all other colors are no longer manufactured  Replacement Parts for: Hurd, Rivco and Marvin and more Closest match Marvin Safe-T-Plus known Known part numbers: White 15942575, 15943175, 15944375, 15347063, 15948963, Brown 15952575, 15953175, 15954375, 15957063, 15958963, Pebble Beige 15972575, 15983175, 15984375, 15987063, 15988963, Bronze 15982575, 15983175, 1594375, 15987063, 15988963 Other OA Glass Bead Sizes available:  Part Number 911 - For 5/8" Overall Glass Part Number 912 - For 3/4" Overall Glass  

Read more less

Part Number: 912 3/4" Snap-In-Vinyl Glazing Bead - for 3/4" overall glass thickness Use for: For 3/4" OA Glass Size: This item is sold in 6 foot lengths only Color: White (when installed white is all you see) Color: White Replacement parts for: Hurd and Rivco and Marvin Windows and Doors Also available in other sizes: Part Number 914 - 1" Snap-In-Vinyl Glazing Bead Part Number 911 - 5/8" Snap-In-Vinyl Glazing Bead 

Read more less

Part Number 215   Manual Window Wand For Clear Story Windows Special Order Item - NO RETURNS or Order Cancellations  - Normal Estimated Lead time 2 - 3 weeks, but can be longer. During Busy months with high order volumes lead time can be 8 - 12 weeks. Put those operable clearstory windows to energy-saving use with our clerestory extension crank. High mounted windows are excellent for capturing light while providing privacy, but they can also be “excellent” heat traps. It is now possible to vent the heat that rises to these areas as easily as opening any other window in the home.It’s inexpensive and can easily retrofit to existing or new window installations. By simple removal of the existing crank handle and replacement with an adapter (see Hex-Bolt part number 216 and 217 sold separately) the crank will open and close any operable clerestory window. It is not necessary to replace the current operator. Remember that you will only need one clerestory crank to operate all windows at the same height. Color: natural anodized aluminum  Size:  is the length of the Wand or Crank Length. (see Chart below) Styles available: Sill Mounted or Jamb Mounted (see picture or video)  You must buy corresponding adapter to use wand (sold separately) . See part # 216 or # 217  Don't know what size to order?  Distance from floor is the measurement from the floor to the window. Example if the distance from the floor to the window is 7' then its advised to get a 3' wand or Crank length. See Chart Below for factory recommendations on length. Chart: Distance From floor 7 foot = Factory Recommends 3 foot Crank LengthDistance From floor 8 foot = Factory Recommends 4 foot Crank LengthDistance From floor 9 foot = Factory Recommends 5 foot Crank LengthDistance From floor 10 foot = Factory Recommends 6 foot Crank LengthDistance From floor 11 foot = Factory Recommends 7 foot Crank LengthDistance From floor 12 foot = Factory Recommends 8 foot Crank LengthDistance From floor 13 foot = Factory Recommends 9 foot Crank Length (KD)*Distance From floor 14 foot = Factory Recommends 10 foot Crank Length (KD)*Distance From floor 16 foot = Factory Recommends 12 foot Crank Length (KD)* *KD = Knocked Down (wand shipped in 2 pieces and you have to screw them together). Parts sold separately: Part Number 216 - Crank Handle Adapter for ClereStory Windows "Female" Part Number 217 Clear Story Manual Window Wand Crank Adapter "Male"

Read more less

Part Number S4017 Pivot True V200 Two Way Adjustable Door Hinge - Ashland Colors In Stock: White and Oil Rubbed Bronze All other colors are not A STOCK ITEM ALLOW 3+ WEEKS LEAD TIME ONCE YOU PLACE YOUR ORDER - SPECIAL ORDER ITEM NO RETURNS HINGES ARE HANDED LEFT HAND AND RIGHT HAND - SEE PICTURE TO DETERMINE YOUR HANDING YOU NEED TO ORDER.  Discontinued Colors: Gold Powder Painted is discontinued. Once our stock is depleted they will no longer be available to order. If you can add to cart it is still available  Dimension Current Style:  4 inch wide x 4.25 inch tall Discounted Size: Old style that has been discontinued was 3.75 inch wide x 4.25 Tall. The current style we sell is what Marvin recommends as the replacement option which does require some retro fitting see drop down menu of picture's for Marvin instructions on how to retro fit as well as differences between the old hinge and new hinge and further questions on how to retro fit this hinge you would need to contact Marvin directly). Screws NOT Included Factory Recommends Using the Following Screws Per Hinge:  1 − #10x2 1/2″Phillips flathead wood screws (jamb) 5 − #10x3/4″Phillips flathead wood screws (jamb, stationary stile) 4 − #8x1 1/2″Phillips flathead wood screws (panel) To Adjust Door use: 5/32″ Allen wrench. Key Features:  All Hinges adjust both horizontally and vertically  A Solid brass extruded jamb wing allows for higher hinge carry capacity Hex head adjustment screws, not Phillips or slotted, to provide secure toll engagement and prevent stripping during adjustment  Stainless steel adjustment screws bromide superior corrosion resistance  An integrated hinge pin to provide security for out-swing and in swing doors, and will not lift up during normal door operation  Performance and Operation  Horizontal adjusts 1/16” further than most hinges on the market. Hinge system adjusts 1/4” vertically and horizontally  Extremely low adjustment force by vertically adjusting the door from below, not laterally like other hinge designs Provides and easy-to-see indicator line for accurate vertical adjustment A “maintenance and noise-free” operation, even after a million cycles, by incorporating an internal polymer bushing to eliminate any metal to metal contact  Exceeds BHMA-Grade 3 standards for wood, vinyl, aluminum and steel doors How to Adjust Hinge: It is best to lift the weight of the door panel off of the hinges, then adjust the hinge. This can be done by having a 2nd person lift up on the inside and outside door handle, when the door panel is open. First make horizontal adjustment. To adjust away from jamb turn horizontal adjustment screw counterclockwise using 5/32" Allen wench.  To Move panel toward jamb turn Allen screw clockwise. (Horizontal adjustment screw is located on the hinge leaf that has 2 screws on either side of it). Make any vertical adjustments only after you have completed any horizontal adjustments. To adjust the panels vertically, turn the vertical adjustment screw clockwise using a 5/32" Allen wench. To Lower the panel turn the Allen screw counter-clockwise. (Vertical adjustment screw is located on the bottom of the hinge in the hinge pin shaft) Known to have been used on: Marvin Ultimate In-swing Patio Doors (old style was used pre-2011 and current style was used starting July 30 2012 once they stock of old style ran out) Caradco Jeld-Wen Known Part Numbers: 02101216, 02101213, 02101218, 02101217, 02101210, 02101214, 02101212, 02101219, 02101211, 02101215, 02101220, 02101234, 02101236, 02101227, 02101224, 02101229, 02101228, 02101221, 02101225, 02101223, 02101230, 02101222, 02101226, 02101231, 02101235, 02101237  

Read more less

#834 - Hoppe 3Pt Striker For Rollers - Auto - Bright Brass Replacement Parts for Hoppe Multipoint Hardware used on swinging patio doors Known To have Been Used On: Hurd, Weather Sheild, Hoppe, Marvin BiltBest and many other door brands that used Hoppe Multi Point Hardware  Sold Separately Are Part Numbers:  #813 - Hoppe 3Pt Convert Auto Release Striker #833 - Hoppe 3Pt Convertible Under plate    

Read more less

Part Number: 117 Operator for Casement  Window Entrygard Truth 15 Series  Straight Arm 15.94 . Handing: Left Hand and Right Hand. See pictures that are labeled to determine your handing of your operator  Overall arm length 9 1/2 inch see Pictures  Known Part Numbers: 117 - U.S. Pat. 4,241,541 - CAN Pat. 350,432 - PAT 1982 Know Numbers Stamped on Housing and Gear: U.S. Pat. 4,241,541 - CAN Pat. 350,432 - PAT 1982, PAT.NO. 4,840,075, 45275, 31782L Handle and Cover Sold Separately See part # 139 for handle and #166 and #S1004 for cover. Known Replacement Parts for: Hurd, Marvin, Cascade, Caradco, BiltBest, Milgard, Sierra Pacific, Norco and more. Truth Factory Cut Sheet for 15 Series Streight Arm 15.49 Operator  

Read more less

Part Number 401  Amesbury Truth Entrygard II Check Rail Sweep Sash Lock and Keeper Set Check Rail Lock and Keeper Set  for Single or Double Hung Windows and Horizontal Slider Windows  What included: 1 Lock, 1 Keeper and 4 Color Matching ScrewsColors Available: Bronze Discontinued Colors: Dark Bronze, Bright Brass, white, goldtone and New Goldtone (once our stock is gone they are discontinued colors and no longer available)  Known Part Numbers For Lock: 11869395 - Bronze, 11869396, 1719BR - White, 45226, 45192, 40381, 1719W. U.S. Pat. 268,643, 310 CAN. PAT. 49255 Known Part Number for Keeper: 9415 Brands: Hurd Windows, Marvin Windows, Entrygard, Amesbury Truth

Read more less

Part Number: 1001  Hoppe French Casement Hardware Handle 38MM (1.5 inch) Shaft Part Number 1001 has been known to have been used on Hurd, Sierra Pacific, Marvin and more French Casement Windows. Replacement option for old FUHR hardware that was bought out by Hoppe Color In stock  White is the only color we stock.  ( #37 White, Brushed Chrome, Champagne, Satin Taupe, Matte Black  is no longer available)  All other colors are Special Order items: Rustic Umber - also called Oil Rubbed Bronze FB by Hurd and Sierra Pacific. FB finish which means means its a stable finish and NOT a living finish that will change over time.  Antique Finishes from HOPPE North America deliver the unique aesthetic of an aged finish for the discerning hardware connoisseur. Intended to simulate the natural and inconsistent qualities that come with tarnish and age, Antique Brass and Antique Nickel finishes are the result of carefully handcrafted process that have been thoroughly refined. Antique Brass and Antique Nickel finishes by HOPPE will maintain their original appearance and are not considered “living” finishes. These finishes feature coatings that protect each surface from tarnish.  When considering Antique Finishes, the user should be aware these finishes will exhibit variation in color and shade just as an actual tarnished piece of brass or nickel would show. Curved and shaped surfaces will show greater contrast and highlights of golden brass or shiny nickel as shown above. Slight variations can also be expected from one piece to the next. HOPPE maintains a careful balance of consistency blended with purposeful variation to yield the desirable aesthetic of an Antique Finish. The result is a unique hardware piece created with an artisan’s touch. If more consistent appearance is desired, HOPPE recommends Polished Brass (F71, F77-R) in place of Antique Brass and Satin Nickel (F42, F42-R) in place of Antique Nickel. All other colors are special order items NO returns, exchanges or cancellations. We DO NOT stock them. Customers please expect  a 3-6 week lead time All color finishes  are very nice and that is why the price is so much more (except for the #37 White as already noted)  Related Parts Sold Separately:  Part Number 1000 - French Casement Connector Shaft FC Adaptor Part Number 1001 - French Casement Handle 33MM (1.5") Shaft  Part Number 1002 - French Casement Mounting Plate Part Number 1003 - French Corner Drive VS S-ES A0055 Part Number 1004 - French Casement Eurogroove Cover, Long Part Number 1005 -  French Casement Eurogroove Cover, Short Part Number 1006 - French Casement Gear S-ES 115/16 2MV FH Part Number 1007 - French Casement FC Linkage Part Number 1008 - French Casement Strike Lead-In S-ES Part Number 1009 - French Casement Strike

Read more less