Fees products

Part Number 144 Amesbury Truth Window Sash Keeper for Window Lock. Keeper only no screws included  Color: EGARD Size: Large  Measurements: 1-3/4"W Overall x 29/32" H  1-3/8" center to center screw hole May have 30827A stamped on the part.

Read more less

Part Number 145 Amesbury Truth Window Sash Keeper for Window Lock Color: Eguard Finish  Measurements: 1 29/64" w x 37/64 Deep May have 61437 stamped on the part.

Read more less

Part Number 146 Amesbury Truth Window Sash Keeper for Window Lock Part Number 146 all colors are Special order item - non stock, no returns. Allow at least 1-3 week lead time depending on factory stock.  Color: E-GARD, Stainless Steel and High Strength  Measurements: 1 21/64" Wide x 37/64 Deep x 57/64" Tall May have 31344A stamped on it.

Read more less

Part Number: 147 Amesbury Truth Encore Sill Mount Casement Operator - Reverse Dyad Arm style 50.60 The Encore series Dyad operator is designed for narrow windows and will operate sash size form 16" to 32" Wide , up to 72" Height and weighing up to 55 lbs.  Handing Left Or Right - View pictures above, video and pro tip below to determine that handing you need to order.  147 is the Operator Only read pro tip below - You will need to purchase the cover and handle kit part number 137 sold separately. Pro Tip: Please note these operators are used on narrow windows and are called reverse dyad. So it’s going to seem confusing but for example if your operator is a right hand operator it will will need a left hand cover and handle kit. Handing designation is determined by the manufacturer see Amesbury Truths product tips in pictures. As well as video below.  Manufacture Details: Encore Operators give you all the strength and performance characteristics of Maxim, but with the flexibility of a snap-fit cover and streamlined full-flip folding handle that eliminates collapse during operation. Encore Operators require 33% less effort to operate than previous operators and are designed to use the same mounting location as the Maxim system. Stainless steel components are available for coastal applications. These operators complement the Encore Multi-Point Locking System. Recommended Screws: (Qty 6)  8 X 1 Flat Head Sheet Metal Screw (Qty 2)For Rear Mount: #8-32 X 3/8 Pan Head Machine Screw Associated Parts Sold Separately:  Part Number: 137 Encore Folding Handle and Cover Kit Video to Determine Handing for Part Number 147 Operator and 137 Cover and Handle Sold Separately:   Video On How To Install Casement Operator:  Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle Ľ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed. Known to be used on Hurd Windows narrow Casements  9/19/05 to Present, Anderson Windows 100 Series and many other window brands Known part number: 147, 36-371EN, 36-372EN

Read more less

Butt Hinge Champagne Anodize ONLY

Read more less

Part Number 152 EntryGard (EntryGuard) Dual Arm Operator 5 17/64" (inch) Style Handing:  Left Hand Right Hand View pictures and how to video below (2:40 min) to determine handing you need. Measurements in Chart (Scroll Thru Pictures for Chart):  "A" Measurement in Drawing is 5 17/64" Circled in red in chart "B" Measurement in Drawing is 4 7/16"  circled in red in chart The other arm sizes are available for "A" and "B" measurements which can be ordered using our links below using our factory drop ship part catalog website (scroll thru pictures to see arm option chart for part numbers and See how to video below on how to read the chart).  Styles Available : Link Offset Up  Link Offset Down   Note: Detached clips can be revered in the field to be on top of bottom of arm. 152 will all come as Clip on the top. Finish:  E-Gard Handle and Cover Sold Separately See part # 139 for handle and #166 cover, S1002 Cover or upgrade to #S1004 for nesting handle and cover.  Known Part Numbers: 20910, L30941, 40853, U.S. PAT. 4,241,541 - CAN. PAT. 350,432 - PAT. 1982 , 31538, 40754, 45179, 40753, 31538A, 20810A, 15-63-00-002 15-63-00-001, MONCSE953, R3-2256, 53-2255  Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Norco Milgard, Sierra Pacific, Allsco (1980 to Dec. 1997), Monarch Old Series and more. Other Arm Sizes Links to Order (this is an update to our video below). Watch video to see how to read chart in pictures above to determine your A and B Measurements match part numbers on chart to links below: Click here to order: 36-181 Click here to order: 36-182 Click here to order: 36-183 Click here to order: 36-184 Click here to order: 36-186 Click here to order 36-185 Info on our parts catalog factory direct website Cut Sheet For EntryGard Dual Arm 15 Series 

Read more less

Part Number: 158 Amesbury Truth Casement Sill Mount Operator-Encore-Single Arm 52.11  158 is the Operator Only - You will need to purchase the cover and handle kit part number 137 sold separately.Manufacture Details:  Encore Operators give you all the strength and performance characteristics of Maxim, but with the flexibility of a snap-fit cover and streamlined full-flip folding handle that eliminates collapse during operation. Encore Operators require 33% less effort to operate than previous operators and are designed to use the same mounting location as the Maxim system. Stainless steel components are available for coastal applications. These operators complement the Encore Multi-Point Locking System.  Brands Known to be used on: Hurd for 19"-27" wide casements, Weather Shield, Sierra Pacific  Associated Parts Sold Separately:  Part Number: 137 Encore Folding Handle and Cover Kit  Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle ¼ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed. Part Number: 158, 36-402EN, 36-403EN

Read more less

Part Number 166 EntryGard Replacement Covers Only - 10341 Amesburty Truth  Truth EntryGard Operator Contour Cover Only - Fits 15 Series EntryGard Casement and Awning Operator andHandles 139 and 135 sold separately  - See Accessories items Known Part Numbers On Operator: 20910, L30941, 40853, U.S. PAT. 4,241,541 - CAN. PAT. 350,432 - PAT. 1982 , 31538, 40754, 45179 Discontinued Color:  Coppertone. For Additional Entrygard Covers in different styles  and colors see part numbers S1002 and S1004  Replacement Parts for: Hurd, Semco, Marvin, Cascade, Caradco, BiltBest, Milgard, Sierra Pacific and more. Free Economy Shipping On All USA Orders. If Cover color or QTY you want to order is is out of stock you can pre-order and parts will ship out as soon as they come in from the factory.

Read more less

Adding a Keeper Finder to your order will assist you in installing your new locks. QTY One (1) Keeper Finder is all that is needed to install multiple locks. Use with Part number 179 Window Lock For keeper finder instructions. Please visit out blog at the link below How To Use a Keeper Finder - Click On this Link: https://www.windowpartscenter.com/blogs/news/172-keeper-finder-how-to

Read more less

Part Number: 176 176 - Amesbury Truth EntryGard (EntryGuard) Dyad (Split) Arm Casement Operator Truth EntryGard Dyad Arm Operator. The dyad operator is also know as a hinged single arm operatorHanding Left Hand and Right Hand: See Pictures to identify the correct handing you needDetached chips can be reversed in the field.Size: "A" Measurement is 6 Inches For other A measurement styles as shown on chart see links below to order from our Factory Parts Drop Ship website Styles:  Link Offset Comes in Link Down as shown in picture (33/64" Measurement) and Link Up (21/32" Measurement) Link Down Option is a Stock Item and shown in picture. For other styles shown on chart see links below to order from our Factory Parts Drop Ship website  Replacement Parts for: Hurd, Semco, Marvin (ULTIMATE AND ULTIMATE WOOD CASEMASTER DISC LA PRE 2010), Cascade, Caradco, BiltBest, Milgard, Sierra Pacific, Allsco and more. Screw Recommendation (screw not sold with item): 5 - #8x 1" Phillips flat head wood screws  Associated parts Sold Separately:  Part Number S1004: Truth EntryGard Cover and Nesting Handle Part Number 139: Handle Roto Crank - 3 1/2" with 11/32" Spline Part Number 166: EntryGard Plastic Covers Known Part Number: 45275, PAT. NO. 4.840.075, 31368, 10815400, 10815401, 15-76-00-001, 15-76-00-002, 36-177, 36-178 Other Arm Sizes Links to Order Read chart in pictures above to determine your A Measurements match part numbers on chart to links below: Click here to order 36-177MOD Click here to order 36-178MOD Click here to order 36-193 Click here to order 36-194 Click here to order 36-199 Click here to order 36-199CG Click here to order 36-200 Email for Quote 36-200CG Info on our parts catalog factory direct website Cut Sheet for EntryGard Dyad Arm Casement Operator 15 Series 

Read more less

Part # 177 Replacement Amesbury Truth Non Folding Contour Handle - 11/32" Spline For Casement and Awning Window Operators.  Colors in stock: White, Bronze, Goldtone, New Goldtone and Beige Special Order Colors: Bright Brass, Clay, Aluminum, Chestnut Bronze, Brushed Copper Nickel, Black, Coppertone, Cocoa Brown, Bright White, Tuscan Bronze, Oil Rubbed Bronze. Special order colors are non returnable and can have a 1-3 week lead time. Replacement part for Hurd Casement and awing window operators Vintage Classic Style: 02/02/1998 - 9/17/2007 and many other window brands using Truth Operators, Allsco, Norco, Vetter, Windsor, Pozzi and many more window brands. Known Part Numbers: Truth 45240, 177, 010768, 010769, 090934, 11454-32, HSCE30, G4-2051, G4-2050, G4-2049, A3-2106, G5-2048, G5-2047, G5-2045, G5-2046

Read more less

DPart Number: 179 LOCK ONLY - Casement and Awning Sash Lock - Curved Handle for Casement and Awning Windows 179 Curve Lock is AS IS ITEM - (may have minor scuffs, etc.) - No returns all sales final. ONCE STOCK IS GONE the 125 Elbow Style it replacement style   Colors in Curved Style: Goldtone Handing: Right and Left.  Ad of 8/6/24 no left hand are available used p/n 125 for replacement  ***Please note that the curved handle lock has been discontinued by the manufacturer so we have limited stock. Once our stock is depleted we will ship out the new lock that is the direct replacement. You will need to retro fit the 125 Elbow Handle Lock (shown in picture) to your windows. Add a Keeper Finder (P/N 172) to your window lock order! The Keeper Finder will assist you in installing your new Elbow Style locks. QTY One (1) Keeper Finder is all that is needed to install multiple locks. Known Part Number: HCSE32 Known to have been used on: Hurd casement and awnings for units manufactured pre 1998. , Biltbest, Caradco, norco and more

Read more less