Part Number 855
Single Point GU Gear Box Hardware* Schlosskasten Security / Schlossk. Sec.
*Single point gear box is not interchangeable with multi point gear box system interior components are different.
For Swinging Patio Doors
Depending on vintage your sticker label color can be orange or white with the following numbers:
Orange Label:
6-29377-45-0-1 A
45-92-8 or 45-92-8 EINST.
White Label:
6-29377-45-0-1 B
Scholssk.Sec.U 45/92/8
Handing: Strike is reversible for both left hand and right hand doors. See video on how to reverse the latch
Brands known to been used on: GU, Hurd, Sierra Pacific and More.
Install Instructions:
Remove set screws on handle levers and remove
Remove mounting screws on faceplate estuation of the handle set
On side of door remove screw that lines up with the lock cylinder.
Remove the handle set
Remove all screws down the side of the door that holds on the gear box (keep all screws you will reuse them)
Install new multipoint with screws
Test for Operation
Reinstall handle set
Test for proper operation
*Single point gear box is not interchangeable with multi point gear box system interior components are different.
updated 7/18/23
Part Number 810
Flipper/Tongue Style Hoppe Multi point for Hurd Swinging Patio Doors and others
(If your door is another door brand please email us and we can email you a worksheet you ok will need to fill out to get you the correct Hoppe multipoint for your door. info@windowpartscenter.com)
Brass color no longer manufactured - only comes in stainless steel for both the gear box and the extensions.
Comes with: bottom extension with gear box attached and the top extension (choose your door height size).
The Hoppe #810 Roller style is the direct replacement for old FUHR Roller Multi point that was on Hurd doors – no modification is needed when changing to the Hoppe #810. The only difference is some of the FUHR multi point had an automatic fire to engage the multi point, the Hoppe does not. So with the Hoppe to engage the multi point you close the door then lift up on the door handle then throw the dead bolt to lock.
Hoppe Roller Style will also replace the Old FUHR Roller style.
handing: Non handed latch is reversible. See video on how to change latch handing
Top Extension: Comes in Door Heights: Retro/6-8, 6-10, 7-2, 8-0.
Style Options:
Hoppe Gear Box Pin/Roller Style
Hoppe Gear Box Flipper/Tongue Style
Hurd Door Panel Heights for Top Extension:77" = Retro/6-878" = Retro/6-880" = 6-1084" = 7-293" = 8-0For Classic Hurd Doors Manufactured from 2005 and PriorFuhr Multi point used on Classic Hurd doors are no longer manufactured - Hoppe Multi point is the direct replacementNumber Known To Have Been On Older Gear Box (Hoppe Roller Style Brass Color): 1334291 - this is a component number.
Install Instructions (also see instructions in pictures):
Remove set screws on handle levers and remove
remove three mounting screws on faceplate estuation
On side of door remove screw that lines up with the lock cylinder.
Remove the handle set
Remove all screws down the side of the door that holds on the multipoint system (keep all screws you will reuse them)
Install new multipoint with screws
Test for Operation
Reinstall handle set
Test for proper operation
Part Number: 835
4" x 4" Ashland Horizontal Guide Hinge Adjusting Swinging Patio Door Hinge
PIVOT TRUE V400 4" ADJUSTABLE HORIZONTAL DOOR HINGES
Handing: Non Handed remove the pin and flip to reverse handing see video below.
For the Mate Vertical Hinge see part number 836
Low Stocked Item - May have a 2-3 week lead time
KEY FEATURES
Seamlessly retrofits a 4" X 4" one-step pocket route with 5/8" corner radius
Hex head adjustment screws, not Phillips or Slotted, to provide secure tool engagement and prevent stripping during adjustment
Screw hole locations optimized away from panel edge to prevent accidental wood splitting
Panel leaf incorporates a unique shield to keep out debris and provide a premium appearance in the closed position
Incorporates Teflon filled bushings for increased wear resistance
Non-removable pin (NRP) option available for secure out-swing applications
PERFORMANCE AND OPERATION
Adjusts 1/4" vertically and 3/16" horizontally
Easily reversible for either left or right-hand hinge applications
Innovative, patent-pending adjustment mechanism achieves extremely low adjustment torque with a standard 3/32" hex wrench
Exceeds BHMA - grade 3 standards for wood, vinyl, aluminum and steel doors.
Known Brands: Ashland, Hurd Energy Saver Patio Door, Sierra Pacific WI Patio Door
Screw Pack: Screws are sold separately and not all colors are available. To order Screws with your hinges see 835/836Screw Pack (1 screw pack will do 1 hinge).
Or you can buy at your local hardware store the following:
QTY 4 - #9 x ¾” or 1” (size change depends on what finish the screw is available in)
QTY 4 - #9 x 1-1/2”
QTY 1 - #9 x 2 ½” or 3” (size change depends on what finish the screw is available in
Associated product Sold Separately:
Part Number 836 Set Hinge
Screw Pack 835/836Screw Pack
IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU.
How To Remove Hinge Pin Video:
Part Number: S4112
W&F Multipoint Mortise Lock 2-3/8IN BACKSET For 6 Inch handle
Used On: MULTIPOINT MORTISE LOCK2-3/8IN BACKSET 6IN HANDLETO CYLINDER PEACHTREECITADEL IPD AND CITATION
high performance stamped on side of mortise lock box. U.S. PATENT NO’S 5,290,077 5,388,875
Color: Older ones are a gold color where the current version is more green. Green is a direct replacement for the gold.
Non handed - See how to video below. the mortise is reversible for your door handing and also has a interior plastic release. To reverse the lock direction - remove the side plastic covers and swamping the internal cams - side to side. The lock bolt can also be reversed by extend the bolt and slide off the bolt base.
This center mortise lock rotates 50 degrees to retract the bolt. The mortise lock works with all handle sets designed for this lock system [1993-2002].
Replacement handle bushing kit [SKU 56-115] and Auxiliary Lock module springs are recommended parts when replacing the center lock mortise.
DO NOT TAKE APART THE MORTSE LOCK BOX OR REMOVE ANY SCREWS- THERE ARE NO REPLACEABLE PARTS INSIDE THIS LOCK BOX. ANY ALTERATION OR DISASSEMBLY OF THIS LOCK WILL VOID ANY RETURN POLICY. ALL MORTSE LOCKS ARE CHECKED FOR FUNCTION PRIOR TO SHIPMENT.
Associated Parts Sold Separately:
S4112TK - Alignment Key Tool - System Rod Timing Key
D301 W&F Trilennium multipoint 6 Inch CTC Replacement Handle Set
S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F
S4115 Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock
Part Number 808
Frame Weather Strip for In Swinging Patio DoorsUsed on Side and Head Frame of Hurd In swinging French Patio DoorsComes in 4', 8' rolled
3 or 4 Q-lon per door are required if you want to replace all of this type of weather strip on your door:For a Single door you need QTY 3: QTY 2 at 8' pc for the sides and QTY 1 at 4' pc for the head.For a French door then you need QTY 2 at 8' pc for the sides and QTY 1 at 8' pc for the head and QTY 1 at 8' pc for the astragal in the middle. Customer will have to cut weather strip to length they need if they have a smaller door than 4' wide or 8' Tall
***SHIPPING NOTE***Product is shipped rolled in a box. If you want product shipped straight in a long box please email info@windowpartscetner.com for quote. (4 foot and 8 foot only we will not quote or ship out 12 foot pcs straight).
#813 - Hoppe 3Pt Convert Auto Release Striker - Bright Brass
Replacement Parts for Hoppe Multipoint Hardware used on swinging patio doors
May have minor scuffs, etc these come this way from the factory not considered a defect.
Known To have Been Used On: Hurd, Weather Sheild, Hoppe, Marvin BiltBest and many other door brands that used Hoppe Multi Point Hardware
Sold Separately Are Part Numbers:
#833 - Hoppe 3Pt Convertible Under plate #834 - Hoppe 3Pt Striker For Rollers - Auto
Part Number: D307
Therma Tru Door Aluminum Assist Slide Astragal Bolt Spring
Used On Therma Tru Door French Semi Active Door
Sold Individually
Color: Copper
PUSH Is Engraved on the spring
Dimensions: 1/2 Inch Wide x 5 1/2 Inch Long
Part Number 840-016
Replacement Amesbury Truth GU Door Handle Spindle
Spindle made of zinc - can have a sliver or brass look to it.
#11 In Drawing
Dimensions: 5/16 inch × 5/16 inch x 4 1/8 inch (8mm x 8mm x 130 mm)
On Swinging Patio Door Hurd GU handle sets and many other manufacturing brands that use GU handles, truth handles, Hurd
Bulk Pricing Shown In My Cart:
QTY 2-9 30%
QTY 10+ 40%
Associated parts Sold Separately:
Part Number: S4109 - 5M x 6 Set Screw (GU)
Part number: 840-031 - 1/4-20 and 6M Set Screws (GU and Hoppe)
Part Number: S3004 - 6M x 12 MM 304SS Set Screws (Hoppe)
Part Number: R801 / R802
M3 DUAL ADJUSTABLE LIFT OFF CONCEALED BALL BEARING HINGE IN BRUSHED NICKEL FINISH
M3 Hi-Performance Independent Dual Vertical and Horizontal adjustable hinge comes standard with a Lift off feature along with a concealed ball bearing and a Non-Removable Pin.The Rockwell M3 hinges are available in Steel, Stainless Steel or Solid Brass in coated and architectural finishes.
Lift-Off FeatureThe Lift-Off Feature allows for the easiest removal and installation of the door panel to and from the door frame where NO Tools are required, saving time and money.
Hi-PerformanceRockwell Adjustable hinges have been independently third party tested to exceed ANSI/BHMA 156.1 Grade 3 standard for 350,000 cycles with 3 hinges on a 180 lbs door panel.
AdjustabilityIndependent Dual vertical and horizontal adjustment comes standard on all hinges. No separate set and guide hinges.1/4” Vertical Adjustment with a heavy duty 7/16″ hex head vertical adjustment screw that incorporates a ball bearing. Only 2-1/2 turns are required each way with a visual adjustment indicator.5/16” horizontal adjustment with a combination head screw allows the use of either a Phillips or Flat head screw driver. Only 4 turns max are needed each way for 5/16″ horizontal adjustment.One step industry standard routing with 5/8″ corner radius simplifies door preparation. Fits industry standard template making it suitable for new installations or replacements.
Strength and DurabilityHeavy Gauge All Metal Construction.No Plastic or Synthetic Parts.Heavy Duty 7/16” diameter Pin for extra strength.Concealed ball bearing located inside the hinge knuckle that makes for an aesthetically cleaner look.
Smooth OperationHeavy Duty Pin sits on a Concealed Hardened 3/8” Ball Bearing providing ease of operation and improving cycle life.
SecurityBuilt-in Non-removable Pin comes standard making it suitable for both Inswing and Outswing ApplicationsAdjustable Hinge Maximum adjusted door weight : 180 lbs. 3 hinges or 240 lbs. 4 hinges.
Known Part Number: 12500003
IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU.
Part Number: S3003
Replacement Door Bottom Sweep only
Size: 48 inch (customer can cut sweep shorter if needed)
Color: Gray or Black
Limited Stock Item. Can have a lead time of 4-5 weeks***To order Door Shoe with sweep - see door shoe part # S3002***
