Swinging Patio Door Handle Sets & Parts

Part Number 881 GU Multi Point In Swinging Door Strike Colors:  Stainless Steel and Oil Rubbed Bronze  Discontinued colors: All other colors below have been discontinued and no longer available. Any stock we still have is AS IS no return. Antique Brass Bright Brass Polished Chrome White Screws Not Included: Factory Recommends using 7 x 5/8 PH FH Screw Known to be used on: GU, Hurd and Sierra pacific WI in-swinging wood/clad doors.

Read more less

As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available. 840-008 - Amesbury Truth GU Handle - Set Screw and Shaft Type - Swinging Patio Door Hurd. Replacement handle only. All other replacement parts sold separately.  Discontinued Product. What we have in stock is all that is available. No returns, all sales final. Some may have minor scratches. 

Read more less

Part Number 820R  Hoppe Multipoint Automatic Roller Top Extension HLS9000 for HURD DOORS ONLY CUSOTMER PLEASE READ BEFORE YOU ORDER: See chart for dimensions to compare with your multipoint BEFORE you place your order. If measurements do not match for your multipoint please email us for the worksheet you will need to fill out for a quote. Single point gearbox is not interchangeable with multipoint gearbox. The cover may look the same but internal components are different.  Material: Stainless Steel (sliver). Brass color no longer manufactured - only comes in stainless steel for both the gear box and the extension. See features and benefits picture.  Style: Roller Top Extension ONLY Size we stock: (see chart for full details and measurements):  6-8 = Top Extension Length 1019mm / 40.11in Retro = Top Extension Length 1031mm / 40.59in 6-10 = Top Extension Length 1078mm / 42.44in 8-0 = Top Extension Length 1407mm / 55.39in Comes with: Top extension ONLY (Bottom Extension with Gearbox SOLD separately see part number 810R for bottom extension with gear box)  The Hoppe #810R/820R Roller style is the direct replacement for old FUHR Roller Multi point that was on Hurd and other door manufactures – no modification is needed when changing to the Hoppe #810 - you need to order both top extension 820 and lower extension with great box 810 to use as a replacement with old FUHR. The only difference is some of the FUHR multi point had an automatic fire to engage the multi point, the Hoppe does not. So with the Hoppe to engage the multi point you close the door then lift up on the door handle then throw the dead bolt to lock. Associated Parts Sold Separately: 810R - Hoppe Multipoint Automatic Roller Lower Gearbox with Extension HLS9000 813 -  Hoppe 3Pt Convert Auto Release Striker  833 -  Hoppe 3Pt Convertible Under plate  834 - Hoppe 3Pt Striker For Rollers 819 - Hoppe Multipoint Latch Plate  S4019 - Hoppe LATCH AND DEADBOLT STRIKE WITH CURVED LIP S1400AC - Active with Cylinder Munchen Series M112PI/216N Handle Set S4300AC - Active with Cylinder Hoppe Munchen Series M112PI/3965N Handle Set S4200AC - Active with Cylinder Hoppe Munchen Series M112PI/374N Handle Set S4100AC - Active with Cylinder Hoppe Munchen Series M112PI/216N Other Hoppe Multipoint and Single Point We Stock: 810T - Hoppe Multipoint Automatic Tongue Lower Extension HLS9000 820T - Hoppe Multipoint Automatic Tongue TOP Extension HLS9000 825 - Hoppe Single point Gear Box For Hoppe Multipoint We Do Not Stock Please Email us for worksheet and quote  Install Instructions (also see instructions in pictures): Remove set screws on handle levers and remove remove three mounting screws on faceplate estuation  On side of door remove screw that lines up with the lock cylinder. Remove the handle set Remove all screws down the side of the door that holds on the multipoint system (keep all screws you will reuse them) Install new multipoint with screws Test for Operation  Reinstall handle set Test for proper operation 810R/820R Known to have been used on: For Classic Hurd Doors Manufactured from 2005 and Prior. Fuhr Multi point used on Classic Hurd doors are no longer manufactured - Hoppe Multi point is the direct replacement. Number Known To Have Been On Older Gear Box (Hoppe Roller Style Brass Color): 1334291 - this is a component number. 

Read more less

Part Number: S4115 Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock Aux Module This is designed to be field reversible. The latch is two stage, it operates first as a latch, then further extends to be a deadbolt. But the housing is symmetrical and the latch is removable. It  can be operated for Left hand or Right Hand, inswing or outswing swing doors. Associated Parts Sold Separately:  D301 W&F Trilennium multipoint 6 Inch CTC Replacement Handle Set S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F    

Read more less

Part Number S4102 Hoppe 90 Degree Profile Full Cylinder with Crescent Knob For 1 3/4 Inch to 2 1/2 Inch Thick Door Panel Can be converted from 90 degree to 360 degree - see pictures for instructions and videos below. Cylinder Sizing: Verify Door Thickness and Cylinder size by using chart "Inside Distance A" and "Outside Distance B" according to door thickness, Euro groove location and the style of back plate used.  Sizing:   For Doors: 1 3/4 Inch to 2 1/2 Inch Thick Door Panel See chart  For Doors: 2 1/8 inch to 3 inch Doors - see chart  Related Parts Sold Separately: Part Number S4103 - Hoppe Short Cylinder Insert Part Number S4105 - 2mm or 5/64" Hex Wrench Part Number S4107 - Set Screw For 2 1/8 inch to 3 Inch Thick door panel Full Cylinder  see part number  Trouble shooting:  If you cannot get the cylinder to line up and go in you need to lower the pin beneath the thumb turn. That frees the cylinder to move and line up for install. Then once put in and turned the cylinder will operate. It is a newer safety feature on these cylinders. Please watch video below.  

Read more less

Part Number: 862 Construction Handle for GU, Hoppe and W&F Brands - Special Order NO Returns During construction use the construction handle on your patio doors and save your nice handle sets from getting damaged. 

Read more less

840-017- Amesbury Truth GU Screw - Swinging Patio Door Hurd 3/16" x 2" Length  # 7 in drawing each sold separately.

Read more less

Part Number D309 Keyed Cylinder for Trilennium, W&F and Endura handle sets Style: Schlage or Weiser Random Keyed: Means if you order 1 or more each cylinder will use a different key  Keyed Alike: means if you order 2 or more  they will all use the same key Size: 1 3/4 Inch Stile or 2 1/4 Inch Stile Color: Satin Chrome (US26D) or Oil Rubbed Bronze (US10B) (ORB only available in Schaleg style)

Read more less

Part Number S4106 CES Plastic Insert For Cylinder with Crescent Knob Special order item no returns. Please expect a lead time of 1-4 weeks.  Related Parts Sold Separately: Part Number S4104 - Ring Wrench Removal Tool Part Number S4105 - 2 MM Wrench

Read more less

Part Number S4105  For Hoppe and CES 2mm Hex Wrench Cylinder with Crescent Knob To convert cylinder from 90 degree to 360 degree - see pictures for instructions and videos below.  Special order item no returns. Please expect a lead time of 1-4 weeks.  Related Parts Sold Separately: Part Number S4102 - Hoppe Full Cylinder Part Number S4103 - Hoppe Short Cylinder Insert part Number S4105 - Hex Wrench Part Number S4107 - Set Screw

Read more less

As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 805-013- Face Plate - Hoppe Door Handle Set - Hurd Swinging Door Bright Brass NO SCREWS Included  Discontinued Product. What we have in stock is all that is available. No returns all sales final. 

Read more less

Once stock is gone to order new handle set see part number S4100AC As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available 805-006 - Exterior Face Plate - Hoppe Door Handle Set - Hurd Swinging Door 3 exposed screw holes (no screws included) Discontinued Product Part- what we have in stock is all that is available. Sold as is, all sales final.  M216N stamped on back of face plate

Read more less