Part Number: 558
Amesbury Truth - Gemini II PD Dual Action Mortise Lock With Recessed Trim Plate 2818 Series - 2 Point - For Sliding Patio Door
Keeper Sold Separately
Finish:
Standard (Stock)
Stainless Steel (Special order non stock no returns)
Stamped on mortise lock: PAT# 6.284.252 and PAT # 5.820.170
Used On: Hurd Sliding Patio Door and Sierra pacific WI sliding patio door and other door brands.
The Gemini II 2-point mortise locks has set the standard for 2-point locking in the sliding door industry. Gemini II locks are compatible with all industry standard handle sets and features opposing hooks that can be adjusted individually for proper keeper engagement. We offer a variety of keepers that are compatible with the Gemini II 2-point lock system to accommodate any application. There is also a “keeper locator” available to help ensure proper operation of the lock and keeper. The Gemini II lock has been built to help customers meet industry standard forced entry requirements with the ability to withstand 1,500 pounds of force. The lock also features an anti-slam pin that prevents damage to the door or locking system hooks by not allowing the hooks to extend unless the door is closed against the frame.
Product Highlights: Recommended for: aluminum, composite, vinyl, and wood Lock can withstand up to 1,500 lbs. of forced entry Hooks oppose one another to prevent panel lift Individual adjustment of hooks Anti-slam button to prevent false lockup Faceplate options to fit any application Steel and stainless-steel material options Keepers available in various heights and material choices Lock actuator is centered for 3-hole machining or offset by ¾ inches for 4-hole machining Keeper Locator available to ensure good alignment between the lock and keeper in the application
Same Style Mortise Box with Different Face Plate
Part Number: C1035 Amesbury Truth Gemini II PD Dual Action Mortise Lock
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
840-015- Amesbury Truth GU Faceplate Key Cover - Swinging Patio Door Hurd
Discontinued Product. What we have in stock is all that is available. No returns all sales final.
Not numbered in drawing. Pen is pointing to it.
840-024 - Z Bar to hold in place cylinder to face plate of GU Amesbury Truth Handle Set
Comes with 1 Z bar and 2 screws
#3 shown in drawing.
Overall Dimensions: 13/32" Wide x 13/16" Long x 5/64" Thick
Discontinued Product. If it's in stock we have it. No returns all sales final.
Emtek 72 inch Stainless Steel Door Pulls
Part number: 86190
FREE STANDARD SHIPPING. Made to order - Special Order No Returns or cancellations. Allow 1-2 weeks lead time due to Covid or during holiday seasons
Emtek's new durable stainless steel pulls are available in 3 finishes, 2 profile styles (Round and Square), and in 2 overall lengths of 48" or 72". Thick walled tubing allows for reliable product performance without bulk, and the solid milled stems include an optional disc base for secure mounting and increased aesthetic adaptability.
Choose from 3 mounting options for flexibility in most applications: Thru Bolt, Back to Back or Concealed Surface Mount.
Size: 72 inch
Color:
Flat Black (US19)
Stainless Steel (SS)
Polished Stainless Steel (PSS)
Style:
Square - 86188
Round - 86190
Finish (Mounting Option):
Standard (Thru-Bolt with Decorative Caps)
Concealed Surface
Back to Back
Door Thickness:
Fits door thickness of 1-3/4" - 2- 1/4" - let us know your door thickness in the comments of your order. If thicker than noted above please email or text for quote
Made to order - Special Order No Returns or cancellations. Allow 1-2 weeks lead time due to Covid or during holiday seasons
California Residents Proposition 65 Warning Proposition 65
Proposition 65, also known as the Safe Drinking Water and Toxic Enforcement Act of 1986, is a California law that was approved by voters in November 1986. Its primary purpose is to protect California citizens from exposure to toxic chemicals by safeguarding the state’s drinking water sources. The statute prohibits businesses from knowingly discharging listed chemicals into drinking water sources.Proposition 65 also requires that a business selling products that contain certain identified chemicals in excess of defined levels, provide a clear and reasonable warning of the potential hazard. For many listed Proposition 65 chemicals, no warning is required on products determined not to exceed “Safe Harbor” levels of exposure. Proposition 65 is administered by the California Office of Environmental Health Hazard Assessment (OEHHA), which publishes a list of chemicals known to cause cancer or birth defects. This list is periodically updated and currently contains over 800 chemicals. The list is accessible at www.oehha.ca.gov/chemicals.We at EMTEK are committed to providing safe and compliant products for our customers. Our goal is to continually work with our vendors, supply chain partners, and resellers to source responsibly and to comply with regulatory and reporting requirements, including providing product warnings to our customers as required by laws like Proposition 65.Approved Warnings – New OEHHA warning regulations that took effect on August 30, 2018, require more detailed product labelling. EMTEK ensures that its products that require Proposition 65 warnings are labelled in accordance with these new regulations, including identification of specific chemicals and exposure types. Specific product labels reflect the chemical composition of the labeled product. Below is an example of a label which may appear on EMTEK products in order to comply with this regulation:WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.If you have a specific need or question related to these policies, please contact us at:ProductCompliance.Americas@assaabloy.com
963 - Offset Nailing Fin For Sliding Patio Door
Color: WhiteSold in: 4 pack of 6 foot pieces. For runs longer than 6' the nail fin can be pieced together in the frame.
Known to be used on sides and head of Hurd and Sierra Pacific Sliding Patio Doors.
P/N 692 used along bottom sill.
Part # 981
Replacement Screen Track for Vinyl Sliding Patio Door
Screen Track Sizes: 6-0 footMeasurements: 5/8" W x 9/16" H
Known Part Numbers and Brands Used on: 981, V00062, Hurd Monument Vinyl Door and More
Part Number C1024PD1530 Visions Patio Door Handle. Handle ONLY. Other parts like keeper, mortise lock box sold separately see accessories items for all associated known parts.Kit comes with everything you need for one complete new handle.You have the option to order for this handle set. Non-keyed or Keyed (Keyed version is shown in picture and is not a stock item and will be special order item no returns or exchanges).Handle Sets can be handed for either style door XO or OX operation - Handle set is reversible to use on both handing's based on where you place the lock latch.Non Keyed Comes with the following: 1 Handle set (inside and out handle), all handle mounting screws needed, thumb latch. (all other parts are sold separately see below) Keyed Kit Comes with the following: 1 Handle set (inside and outside handle) with hole for cylinder, all handle mounting screws needed. thumb latch, 1 keyed cylinder, and 2 keys. (Keyed version is shown in picture and is a non-stocked, special order item with no returns or exchanges). (all other parts are sold separately see below) Handing: Handle set is reversible to use on both handing's by where you place the lock latch.Colors: White, Almond, Clay and White Int / Black Ext.
Style: old style has been discontinued. The current version is the direct replacement. Once our old style stock runs out the current version will be shipped automatically. see video for more details.
Install: see installation instructions pictured or video at time stamp time 1:45Known Part number on interior handle stamped on back side: PD1530, PD1530-04, PD1430-01 (the -01 etc. refers to the cast mold number to make the handle set part number is the PD1530)
Known Brands: Winpro and Cascade Sliding Patio Door, Rehau sliding patio doors, PD, Visions hardware
Associated parts Sold Separately
Standard Mortise lock C1033
Standard Keeper C1058
Replacement keyed Cylinder see part number C3036
Replacement Upgrade Dual Action Mortise Lock Part Number C1035
Replacement Upgrade Amesbury Truth PD GEMINI KEEPER 2-3 panel(DUAL MORTISE) Part Number C1059
Part # C1026Cascade Sliding Patio Door Roller Screw Hole Plugs
Come in package of 2
These plugs are used at the bottom of the active patio door panel and plug the 2 holes for the roller adjustment. Colors: White, Almond Or Clay
used on Cascade Vinyl Patio Doors
Part Number C1028Cascade Patio Door C9700 Secondary LockColors: White, Almond and ClayStyle (Handing): XO or OXXO = Left Panel Operates and Right Panel is Fixed ***LOOKING FROM DOOR FROM EXTERIOR*** see drawing OX = Left Panel is Fixed and Right Panel Operates ***LOOKING AT DOOR FROM EXTERIOR*** see drawingAll window and patio door handing for hardware and parts are ALWAYS determined by looking at the window or door from the EXTERIOR as this is INDUSTRY STANDARD for all window and door manufactures. DO NOT DETERMINATE HANDING LOOKING AT THE INSIDE OF YOUR HOME!
Quick How To Video:
Longer How to video with more information:
Part Number: C1033
Surface Mount Mortise Lock 45 Degree latch with face plate Deadlatch Assembly
Material: Standard
Cylinder: 45 Degree
Faceplate mounting screw holes: 4 5/8 inch center to center
Overall Depth: 1-9/32 inch
Have known to been used on: Cascade, Sierra Pacific, SuperSeal, Jeld Wen vinyl sliding sliding patio doors, Amsbury Truth Hardware, 2998 Series, SuperSeal, Sierra Pacific Vinyl and Hurd Vinyl and more. VINYL 8000/8500 SERIES SLIDING PATIO DOOR (V-SPD) and more
Part Number C1059
C1035 Amesbury Truth Gemini II PD Dual Action Mortise Lock with Flat Trim Plate
(PAT#: 6,264,252 - PAT # : 5.820.170) 2815 SERIES and 2817 SERIES = 2777 LOCK + 2448 PLATE
The Gemini II 2-point mortise locks has set the standard for 2-point locking in the sliding door industry. Gemini II locks are compatible with all industry standard handle sets and features opposing hooks that can be adjusted individually for proper keeper engagement. We offer a variety of keepers that are compatible with the Gemini II 2-point lock system to accommodate any application. There is also a “keeper locator” available to help ensure proper operation of the lock and keeper. The Gemini II lock has been built to help customers meet industry standard forced entry requirements with the ability to withstand 1,500 pounds of force. The lock also features an anti-slam pin that prevents damage to the door or locking system hooks by not allowing the hooks to extend unless the door is closed against the frame.
Product Highlights: Recommended for: aluminum, composite, vinyl, and wood Lock can withstand up to 1,500 lbs. of forced entry Hooks oppose one another to prevent panel lift Individual adjustment of hooks Anti-slam button to prevent false lockup Faceplate options to fit any application Steel and stainless-steel material options Keepers available in various heights and material choices Lock actuator is centered for 3-hole machining or offset by ¾ inches for 4-hole machining Keeper Locator available to ensure good alignment between the lock and keeper in the application
Same Style Mortise Box with Different Face Plate
Part Number: 558 Amesbury Truth - Gemini II PD Dual Action Mortise Lock With Recessed Faceplate - 2 Point - For Sliding Patio Door
