Part Number 544
Amesbury Truth Signature Style Handle Set Two Point Locking For Sliding Patio Door
Signature Style Handle Set 40.94 and 40.68- Truth (mortise lock box and keeper not included)
Model:
Standard 40.94 - contour shape which is both elegant in style and easy to grasp.
Contemporary 40.68 - sleek modern design resulting in a contemporary look that is sure to compliment your door system. (If replacing 40.68 on existing door with 40.94 with dual mortise lock you will need to purchase Contemporary style keeper sold separately)
Style:
Active with key - handle set comes with 2 keys and keyed cylinder, for exterior locking and unlocking capability.
Dummy - for 4 wide sliding patio doors, secondary panel. no locking capability.
Product Used On Hurd Energy Saver Sliding Patio Door. Direct replacement for Old style Energy Saver Handle Set #501Special Order Item - No Returns - lead time 2-3 weeks.NOTE: Part # 501 Handle set that is a Truth part and used on Hurd Energy Saver Sliding patio doors was used up until about February 2014. The Current handle set is called their Signature Style #544 and is slightly different from the #501. However they are interchangeable and # 544 will work on your door. Some staining or touch up may be required but screw holes are the same.
Related Product Sold Separately:
Mortise Box and Keeper for Old Style 501 Handle Set: Used with Part # 555 - Amesbury Truth 2 Point Recessed Mortise Lock & Keeper Kit
Current Style Mortise box part number 558
Current Style Keeper Part Number C1059
40.94 Contemporary style keeper sold separately
***STOP!!! read all info AND watch video below!!!!***
Part Number 555 is DISCONTIUDED. No Longer Available. The retro Fit Replacement option you will be shipped is part number 558 - please watch video below as you will need to mortise out wood from your door panel to make 558 work.
To Purchase part Number 558 Click Here
When purchasing new style 558 as a replacement for 555 you will also need new style keeper C1059 which is SOLD SEPARATLY click here for C1059
Old style keeper to go with # 555 SOLD SEPARATLY part number 501-002 click here for 501-002 keeper
Double-hook Mortise Lock (Truth Hardware) with pocket face plate
AmesburyTruth Hardware 2 Point Recessed Mortise Lock
This fits Hurd / Sierra Pacific Energy Saver Sliding Patio Door Old Style and many other door brands
Used on part number 501 handle set for sliding patio doors
Known Part Numbers: 097182, 097180, 4-5033, 4-5034
Part Number: 558
Amesbury Truth - Gemini II PD Dual Action Mortise Lock With Recessed Trim Plate 2818 Series - 2 Point - For Sliding Patio Door
Keeper Sold Separately
Finish:
Standard (Stock)
Stainless Steel (Special order non stock no returns)
Stamped on mortise lock: PAT# 6.284.252 and PAT # 5.820.170
Used On: Hurd Sliding Patio Door and Sierra pacific WI sliding patio door and other door brands.
The Gemini II 2-point mortise locks has set the standard for 2-point locking in the sliding door industry. Gemini II locks are compatible with all industry standard handle sets and features opposing hooks that can be adjusted individually for proper keeper engagement. We offer a variety of keepers that are compatible with the Gemini II 2-point lock system to accommodate any application. There is also a “keeper locator” available to help ensure proper operation of the lock and keeper. The Gemini II lock has been built to help customers meet industry standard forced entry requirements with the ability to withstand 1,500 pounds of force. The lock also features an anti-slam pin that prevents damage to the door or locking system hooks by not allowing the hooks to extend unless the door is closed against the frame.
Product Highlights: Recommended for: aluminum, composite, vinyl, and wood Lock can withstand up to 1,500 lbs. of forced entry Hooks oppose one another to prevent panel lift Individual adjustment of hooks Anti-slam button to prevent false lockup Faceplate options to fit any application Steel and stainless-steel material options Keepers available in various heights and material choices Lock actuator is centered for 3-hole machining or offset by ¾ inches for 4-hole machining Keeper Locator available to ensure good alignment between the lock and keeper in the application
Same Style Mortise Box with Different Face Plate
Part Number: C1035 Amesbury Truth Gemini II PD Dual Action Mortise Lock
Part Number: 692 - Truth Folding Nailing Fin Sill - Set of 4
Sold in: 4 pack of 6' lengths. For runs longer than 6' the nail fin can be pieced together in the frame.
Size: 6 foot pieces, short 6" sample
Known to have been used along the bottom of Hurd Horizontal Sliding Windows and Casement windows
Part Number: 694
Bay & Bow Window Cable Support System Kit
Kit comes with:
A. 2-Support Cables (9'3-1/4")
B. 2-Cable Cleats
C. 4-2-1/2" Wood Screws
D. 2-"T" Nuts (Bushings)
E. 2-Washers
F. 4-1/4" x 28 Hex Nuts
Product can be used on Sierra Pacific, Hurd and other brand bay and bow units. Instructions shown on our website are from Sierra Pacific (who purchased Hurd that uses this cable support system on their bay and bow units)
part number: 703 - Discontinued - Replacement is S703
Screen Plunger & Cap for H3 Hurd And Sierra Pacific
To Order Replacement See Part Number S703H3 Clear Cap Version Discontinued in 2021
Kit Includes: 1 Lock, 1 Keeper, 4 screws
Locks are Handed.If you window only has 1 lock then it is a Left Hand.If window has 2 locks then it has a Left Hand and a Right Hand***Left Hand and Right Hand Locks are sold separately - See picture for handing
Goldtone has been discontinued by manufacturer. Once stock is depleted Champagne will be shipped out in its place.
Number that can be stamped on the back of the lock: 32782Numbers that can be stamped on the back of the keeper: 677147
This block and tackle balance is used on Hurd Energy Saver Concealed Jamb Liner Double Hung / Single Hung and H3 Lines.Also used on other manufacturers windows - customer will have identify and match up picture. To order block and tackle balance: See number stamped on side of metal and match it up to the options.Due to the multiple sizes available these are not a stock item and have a 3 week lead time. Special order item NO returns.
You will receive once balance system. if you need to replace both the left and right side on one window order QTY 2.
Part Number: 710
710 current style. See pictures and directs on how to replace.
Snap On Balance Shoe kit for Concealed Jamb liner
Style:
710 Current Style - comes with new rivet pin as 710 is longer and mounts in the 2nd hole of your balance bar. If you do not have the rivet installation tool you will also need to order it. Part Number: Coming Soon is Sold Separately (see guide replacement instructions)
Uses on H3 Double Hungs and Hurd Energy Server Concealed Jamb Liner Double hung and Single Hung Windows.327 Old Style Over All Dimension NLA: 1 15/16" L x 19/32" W x 11/16" D
Associated Products Sold Separately:
Part Number S2021 - Rivet Setting Tool
Part Number S2022 - Sash Balance Guide Rivets
714 - H3 Sash Weather Strip Awning and Casement
Color: White, Bronze, Sand.
Sold by the foot Rolled: Larger QTY's maybe shipped in multiple rolls. Example if you order 300 feet you may receive QTY 6 - 50 foot rolls. Some rolls maybe in increments of 25 feet. (for full spool order 1250 feet)
no returns of rolls of less than 25 feet
Returns will only be accepted for full uncut rolls in increments of 25, 50 and 100 feet.
1000 feet + orders - no returns**
**Can have a lead time if not in stock no order cancelations or returns
Bulk Pricing Calculated Once Added To Cart:
QTY 25 - 49 Feet 45%
QTY 50-99 Feet 55%
QTY 100-499 Feet 65%
QTY 500-999 Feet 75%
QTY 1000+ Feet 80%
Known to have been used on Hurd Sierra pacific Gen II H3 Windows
