Jamb Liners & Sash Parts

Part Number 329 Sash Lifts or Sash Handle for Double Hung and Horizontal Sliding Windows  Zinc Die Cast Brand: Amesbury Truth / Truth Hardware  Comes With 1 sash lift  Low Stocked Colors: White, Bronze and Coppertone - May have a 1-4 week lead time and special order item no returns Discontinued  Colors:  Bright Brass have been discontinued  Used on Hurd, Weather Sheild and may other Single Hung and Double Hung Windows.  Known Hurd Part Number 013777, Allsco 211 Screws not included

Read more less

Part Number 335 Balance Window Springs For Single and Double Hung windows. Replacement window springs used on many single hung and double hung windows with compression tilt jamb jamb liners. Each spring will come with a Clip as shown in picture. Clip is removable if you do not need it on your window.Due to the multiple sizes springs come in we do not stock springs. All springs are special order with a 1 - 2 week lead time. NO RETURNS for springs as they are special order/made to your order.Spring is 3/8" Diameter outside to outsideThe spring gauge or tension is as follows and is commonly associated with these color tips on the springs themselves: Red .041, Green .044, Yellow .047, Black .048, Purple .051To Order By Spring Length Inches : Measure from tip of Eyelet to tip of Eyelet on spring. (Eyelet is the round bent out part of the spring located at both ends).To know what color gauge and length to order: you will need to remove the springs from the jamb liner. Most Springs are color coded at one end with paint. Please watch both how to videos below that show how to remove the jamb liners from your window/reinstall and how to remove and replace the springs. You can also use the chart in the pictures as a guide on which gauge to order (chart is for Hurd Wood/clad windows) other brand windows lengths or gauge of the springs can vary. so ordering a longer spring than needed is recommended and you can cut it to the length you need.  You can also determine gauge of a springusing a spring wire gauge, pocket wire gauge, or a math formula: Spring wire gauge: Insert the gauge into the spring and count 20 coils. Then, look at the gauge markings to find the wire size. Pocket wire gauge: Match the coils on the spring to the correct wire size key in the gauge. Math formula: Count 20 coils of the spring and measure their length in inches. Then, divide the measurement by 20 to determine the wire size Pro Tip: If the Springs are old and maybe a little stretched out it is better to order springs longer then you need as you can cut the springs shorter if needed by using a pair of Wire Cutters or Cable Cutters. Then you can bend out the eyelet with pair of regular pliers and flat head screw driver. See demonstration video below.Lead Time: Due to the multiple sizes springs come in we do not stock springs. All springs are special order with a 1 - 2 week lead time. NO RETURNS for springs as they are special order/made to your order. Larger orders may have longer lead times. Please contact us with any questions.   Have been used on Hurd, BiltBest, Weather Sheild and Cradco windows and many other window brands.

Read more less

Part number: 708Tilt Pivot Pin sold individually (Use #7 x 5/8" Screws - Not included) Replacement Pivot Pin for H3 Double Hung Windows

Read more less

This block and tackle balance is used on Hurd Energy Saver Concealed Jamb Liner Double Hung / Single Hung and H3 Lines.Also used on other manufacturers windows - customer will have identify and match up picture. To order block and tackle balance: See number stamped on side of metal and match it up to the options.Due to the multiple sizes available these are not a stock item and have a 3 week lead time. Special order item NO returns. You will receive once balance system. if you need to replace both the left and right side on one window order QTY 2.

Read more less

Part Number: 710 710 current style. See pictures and directs on how to replace. Snap On Balance Shoe kit for Concealed Jamb liner  Style: 710 Current Style - comes with new rivet pin as 710 is longer and mounts in the 2nd hole of your balance bar. If you do not have the rivet installation tool you will also need to order it. Part Number: Coming Soon is Sold Separately  (see guide replacement instructions) Uses on H3 Double Hungs and Hurd Energy Server Concealed Jamb Liner Double hung and Single Hung Windows.327 Old Style Over All Dimension NLA: 1 15/16" L x 19/32" W x 11/16" D Associated Products Sold Separately:  Part Number S2021 - Rivet Setting Tool Part Number S2022 - Sash Balance Guide Rivets  

Read more less

Balance double hung clip for vinyl Windows. Pack of 4 For side Sash load double hung and single hung windows Clip when pulled out to 45 degree angle makes it possible then to remove sash.  Used on many vinyl window lines such as Cascade Vinyl windows, Milgard and Viking vinyl Windows  and more

Read more less

Part Number S1003 Old Style is DISCONTINUED PRODUCT NO LONGER AVAILABLE. The current style is the replacement option available per the factory - see pictures and compare drawings with dimensions.  Sash Pivot Pin Set - 1 LH 1 RH per Set Zinc Die Cast Replacement part for Weather Shield Double Hung and Single Hung (known part number 640008 and 640007) If using current style As this is a replacement option we recommend buying 1 set to try and make sure it would work with you window application before ordering multiple sets. This is a retro fit application not a direct replacement. We have had multiple customers buy the current style and say they work as a replacement option for the old style pivot pin as long as the old style that is pictured on our website is what you have. If you feel that you are not able to retro fit the pivot pin we recommend customers contact a local a window service technician in your area.  Old Style Measurements:  Height: 1-3/4 inchWidth: 1/2 inchScrew Hole Spacing: 7/8 inch Current Style Measurements:  Length: 1-15/32"Width: 7/16"

Read more less

Part Number: S1081 Ashland Pivot Bar - 85 Series Balance Accessory for Double Hung and Single Hungs Brand: Ashland Hardware Systems  Material: Zinc Die Cast Sold Individually  S1081 is an Accessory part for 85 Series Balance Accessory   

Read more less

Part Number: S1083  Crestline Jamb liner Clutch Set Color: Off White Set of 4 includes:1 top Left1 bottom Left1 top Right1 bottom Right Sold as a set only This S1083 - Crestline Jamb liner Clutch Set is the perfect replacement for your Crestline double or single hung windows. Direct replacement, your windows will function again, providing the perfect balance of style and functionality. Upgrade your windows today with this replacement clutch set.

Read more less

Part Number: S1117 Pivot Bar Tilt Latch For Vinyl Double Hung Windows Sold Individually  Plastic Overall Dimensions: 11/16" Wide x 2 5/8" Long x 7/16" Tall Metal Pivot Bar: 5/16" Wide x 2 11/16" long x 3/16 Tall Color: White Stamped On Underside of Part: 092 11

Read more less

Part Number S1118  Double Hung Jamb Liner Friction Shoe Sold white style was discontinued  in September 2018. Current style is the Tan  Sold as a set of 2 Not a stock item. Special order no returns. Please allow 1-5 week lead time depending on factory stock. We can check stock for you before you order to let you know an ETA please send us an email or text. Once order is placed with the factory we can not cancel the order. reference part number WB1395-058.

Read more less