Casement Window Operators, Parts and Accessories

102 products


  • Replacement 3" Window Roto Operator Crank Handle for Amesbury Truth with 11/32" Spline Operators

    Handle Roto Crank - 3" with 11/32" Spline - DISCONTIUED See Product Description for Replacement Option

    Out of stock

    3" had been discontinued - See Part Number 139 3 1/2" for replacement option ** Please note: That the Short 3" Handle Roto Crank has been discontinued by the manufacturer. The Replacement Option is Part Number 139 3 1/2" version. You may want to try Part # 135 T Handle is nice to use when you have blinds on your windows.  Known Part Numbers: 139, 45054 31  Associated Parts: Part Number 139 3 1/2" Handle Part Number 135 T Handle

    Out of stock

    $ 27.00

  • Last stock! Part Number: S1053  Anderson Casement Straight Arm Crank  Perma Shield Enhanced corrosion resistant. Known part numbers are: S1053, 750-1361405, 1 361 105 L, 1 361 935 HCR, C-9400-1, F9400-8, 1 361 404-R, 1 361, 934 HCR, 750-9015119, 750-9015120

    S1053 Andersen Casement Straight Arm Crank Perma-Shield Enhanced - 14 Inch Arm

    3 in stock

    Part Number: S1053 - 14 Inch Arm Replacement Operator Crank For Andersen Casement Windows Andersen Casement Straight Arm Crank  Perma Shield Enhanced corrosion resistant. Comes with: 1 Operator, 5 Screws and 1 Adapter Plate (S1059). Handing: Left hand or Right Hand Color: Standard (in stock) or Corrosion Resistant (special order no return) Dimensions: 14" Arm. Screw hole placement is 2 5/8" center to center and 3 11/16" center to center  This is a replacement style for the old Andersen window 14  Inch straight arm operator.  New Operator will come with an adapter plate (S1059) for seamless retro fit installation. Replacement operator has rounded corners on the base and may not look the same as the operator being replaced. (extra adapter plates are available Part Number S1059). Use on Anderson  CX & CXW windows manufactured from 1999 to present Prior to 2011 this operator was standard on all Anderson windows with a straight arm operator When replacing operators on windows manufactured 1995 to 1998 an adaptor plate, ( part number S1059 is included), is necessary for installation and a new operator cover will be needed Starting in 2011 all windows with straight arm operators use an operator with a 12" arm except the CX and CXW windows Accessories That Ares Sold Separately:  Andersen Casement and Awning Window Classic Style Stone Cover Part Number S1057  Andersen Casement and awning Classic Style Stone Crank Handle Part Number S1058 Andersen Casement Window Classic Operator Crank Dyad Split Arm Part Number S1055  Andersen Casement Straight Arm Operator Track Part Number S1054 Extra adapter plates are available Part Number S1059. Andersen Casement 12 Inch Straight Arm Operator Part Number S1070     Known part numbers are: S1053, 750-1361405, 1 361 105 L, 1 361 935 HCR, C-9400-1, F9400-8, 1 361 404-R, 1 361, 934 HCR,  (Old Operator Known part numbers are: 750-1361405, 1 361 105 L, 1 361 935 HCR, C-9400-1, F9400-8, 1 361 404-R, 1 361, 934 HCR).

    3 in stock

    $ 91.00 - $ 115.00

  • S1142 - Black Slider Shoe for Window Track OP051002 Roto North America

    S1142 - Black Slider Shoe for Window Track OP051002 Roto North America

    36 in stock

    Part Number: S1142 Roto North America  Black Slider Shoe for Window Track OP051002 Associated Parts: S1128 Roto North America OP05-8100 - 13 Inch Face Mount Track Assembly

    36 in stock

    $ 10.00

  • C2010 Ashland Hardware Systems Guide Bar with Black Shoe. Dual-Arm Operator Track - SST Part Number 2005729; W1491-75A

    C2010 Ashland Guide Bar with Shoe Dual-Arm Operator Track - SST

    66 in stock

    Part # C2010 Ashland Hardware Systems Guide Bar with Black Shoe. Dual-Arm Operator Track - SST Black shoe is not sold separately Recommended Fasteners: #8 x 3/4" SS Phillips Flat Head Known Part Number: 2005729; W1491-75A Use with Part # C2000 Ashland Optima Casement Window Dual Arm Operator  

    66 in stock

    $ 18.00

  • Part Number 212, 39-758 Black Plastic Detach Clip for Awning and Casement Operators  Stamped on Back: 31879

    212 Black Operator Retainer Clip

    93 in stock

    Part Number 212Black Plastic Dimensions: 5/8" x 1 29/64"Replacement Clip Part for casement and awning window operator.Amesbury Truth Maxim Replacement Part Sold Individually  Stamped on Back: 31879

    93 in stock

    $ 8.00

  • Last stock! Amesbury Truth Encore Sill Mount Casement Operator - Reverse Dyad Arm style Part number 50.60 Right hand

    147 AmesburyTruth Encore Sill Mount Casement Operator- Dyad 50.60

    3 in stock

    Part Number: 147 Amesbury Truth Encore Sill Mount Casement Operator - Reverse Dyad Arm style 50.60 The Encore series Dyad operator is designed for narrow windows and will operate sash size form 16" to 32" Wide , up to 72" Height and weighing up to 55 lbs.  Handing Left Or Right - View pictures above, video and pro tip below to determine that handing you need to order.  147 is the Operator Only read pro tip below - You will need to purchase the cover and handle kit part number 137 sold separately. Pro Tip: Please note these operators are used on narrow windows and are called reverse dyad. So it’s going to seem confusing but for example if your operator is a right hand operator it will will need a left hand cover and handle kit. Handing designation is determined by the manufacturer see Amesbury Truths product tips in pictures. As well as video below.  Manufacture Details: Encore Operators give you all the strength and performance characteristics of Maxim, but with the flexibility of a snap-fit cover and streamlined full-flip folding handle that eliminates collapse during operation. Encore Operators require 33% less effort to operate than previous operators and are designed to use the same mounting location as the Maxim system. Stainless steel components are available for coastal applications. These operators complement the Encore Multi-Point Locking System. Recommended Screws: (Qty 6)  8 X 1 Flat Head Sheet Metal Screw (Qty 2)For Rear Mount: #8-32 X 3/8 Pan Head Machine Screw Associated Parts Sold Separately:  Part Number: 137 Encore Folding Handle and Cover Kit Video to Determine Handing for Part Number 147 Operator and 137 Cover and Handle Sold Separately:   Video On How To Install Casement Operator:  Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle Ľ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed. Known to be used on Hurd Windows narrow Casements  9/19/05 to Present, Anderson Windows 100 Series and many other window brands Known part number: 147, 36-371EN, 36-372EN

    3 in stock

    $ 47.00

  • S1048 Amesbury Truth Casement Dyad Operator Without Detach Clip Window Parts

    S1048 Amesbury Truth Casement Dyad Operator

    10 in stock

    Part Number S1048 Amesbury Truth Casement Dyad Operator Without or with Detach Clip Square Housing has been discontinued by manufacturer. You will receive the new Ellipse style housing for this operator as shown in picture Operators are handed. View pictures to determine what handing you need to order. Handing: Left Hand or Right Hand Colors: White, Goldtone, New Goldtone and Bronze Option: No Detach Clip or With Detach Clip S1105 Special order item no returns. Lead time 1-3 weeks Known part number: 31850 Operators with Similar Housing But Different Arm Lengths:  Part Number S1082 - Truth/Wright Dyad Operator Part Number S1048 - Truth/Wright Dyad operator Part Number S1068 - Truth/Wright Dyad Operator Part Number 111 - Truth/Wright Split Arm Dyad Operator Part Number 105 - Truth/Wright Straight Arm Part Number 115 - Truth/Wright Straight Arm Part Number 109 -Truth/Wright Straight Arm Part Number 112 - Truth/Wright Straight Arm Part Number S1037 -GU - Split Arm Dyad Operator Part Number S1038 GU - Split Arm Dyad Operator Kit  

    10 in stock

    $ 60.00 - $ 80.00

  • S1057 Andersen Window Operator Cover Classic Style. Color White.  part numbers are: part numbers are: 1361357WH, 9457, 1361359ST, 1361529 WH, 1361530 ST, 4513, U.S. Patent No. DES 360,357, 750-1361530, 750-1361529

    S1057 Andersen Window Operator Cover Classic Style

    1 review

    56 in stock

    Part Number: S1053 Replacement Andersen Classic Operator Cover - for Andersen Classic Style Casement and Awning Windows. Color: White and Stone Accessories That Ares Sold Separately:  Classic Straight Arm Operator Operator Part Number S1053 Classic Dyad Split Arm Operator S1055 Classic Style Stone Crank Handle Part Number S1058 Known part numbers are: 1361357WH, 9457, 1361359ST, 1361529 WH, 1361530 ST, 4513, U.S. Patent No. DES 360,357

    56 in stock

    $ 15.00

  • Pella Brixwell Casement Roto Sill Mounted Operator Known Part number:  900-8866

    S1084 Pella Casement Roto Sill Mounted Operator

    6 in stock

    Part Number: S1084 Casement Roto Sill Mounted Operator (this is the current style and the replacement option for the older version. click here to see our blog for retro fit instructions provided by a customer that successfully replaced the old style with the current S1084)  Handing: Left Hand and Right Hand Brand: Pella ( Vintage 1967-1993), Brixwell Cover (part number S1025 or S1126)  and handle (part number S1085) Sold Separate  For Pella Primed All Wood and Wood/Clad Casement Windows (1967- 1993) Operator Dimensions Hole width on base 3-3/4" Arm attached to sash bracket is 6" Sash Bracket has total width of 5-7/16" Known Part numbers: 900-8866, 900-8865, S-900-866, S-900-8865, CRLH4141  

    6 in stock

    $ 199.00

  • S1013 - Peachtree Casement Operator Crank Handle Window Parts

    S1013 - Peachtree Casement Operator Crank Handle

    26 in stock

    Part Number: S1013 Replacement Peachtree Casement Operator Crank Handle 9/32 inch Spline Color: Driftwood White Bright Brass (plated)  Bright Brass is Special Order item allow 4 weeks to ship - no returns or order cancellations on specials order items    This crank handle goes onto casement window operator part # S1012 which is sold separately. 

    26 in stock

    $ 40.00 - $ 60.00

  • Last stock! Sp20002 Amesbury Truth Casement Awning Uto Lock Handle Window Parts

    SP20002 Amesbury Truth Casement Awning UTO Lock Handle

    5 in stock

    Part Number SP20002 Amesbury Truth Casement Awning UTOLock Handle Not a stock item please allow 2-3 weeks for your order to ship. Handing: None Color: White, Brushed Chrome, Bright Chrome, Coppertone, Bright Brass, Satin Nickel, Bronze, Oil Rubbed Bronze, Chestnut Bronze, Black, Matte Black, Antique Brass, Bright Nickel, Western Pewter.  Some colors can have longer lead times -see color chart Known to have been used on: Sierra pacific aspen and aspen 2 Casement and awning windows.  Associated parts Sold Separately:  Part Number SP20000 - UTO Lock Assembly For Casement Windows Part Number SP30000 - UTO Lock Assembly For Awning Windows Part Number SP20001 - UTO Escutcheon Part Number 137 - Operator Cover and handle Part number 119 - Casement Operator Dual Arm Part Number 147 - Casement Operator Dyad Arm Part Number 158 - Casement Operator Straight Arm Part Number  207 - Awning Operator

    5 in stock

    $ 16.00 - $ 40.00

  • Last stock! Part Number: 123  Amesbury Truth Casement Sash Bracket Old Style Sash Bracket Clip On Type (no set ring) For: Split Arm Operator Known Part Number Stamped On Left Hand L 07868

    123 Sash Bracket Clip On Type NO Set Ring

    2 in stock

    Part Number: 123 Amesbury Truth Casement Sash Bracket Old Style Sash Bracket Clip On Type (no set ring see video and pictures) For: Split Arm Operator Old Style No Longer Available once our stock is gone the replacement style will be shipped as shown in the factory drawing. Handing: Left hand or Right hand (see pictures to determine handing) Material: StandardColors Due to change in paint used in production. Random color will be shipped depending on what is in stock. Used on Hurd Windows from 1988 - 02/02/98. And many other window brands that use Amesbury Truth Parts Known Part Number Stamped On Left Hand L 07868

    2 in stock

    $ 11.00

Casement window operator crank mechanism

Login

Forgot your password?

Don't have an account yet?
Create account